Yamaha dvd s1500 dv s5770

Page 1

DVD PLAYER

DVD-S 1500mv-5577o

SERVICE MAN UAL

,/ \
I IMPORTANT NOTICE

Thrs manual has been proyrded for the use ofaulhorized YAMAHA Relarlers and rlreir seryloe personnel,
Ir has been assumed rhar basxc servlce procedures inlrerenr to rlre IlldusIry, and more specifically YAMAHA Produers, are already
known and undersroorl by rhe users. and have Iherefore nor been resrared,

WARNING: Failure Io iollow approprlare serylee and saiely procedures when senlcmg rhis producr rnay resulr rn personal
Injury. deslmcIion or expensxve eoniponenls and farlure of rhe producI ro perform as speclfied. For rhese reasons.
we advise all YAMAHA prodIIcI owners rlrar any service required should be performed by an aurhorized YAMAHA

Relmlsr or [he appoimed service represemhme.

IMPORTANT: The presenrarron or sale of rhls rnarural ro any individual or firm does not eonsurure aurhorrzanon. ceniflcalion or
reeognirion of any applrcable reehnieal eapablllrles. or esrabllsh a prmclplesagenl relarionshrp of any form.

The dara provided is believed ro be aeeurare and applicable ro rlre IInMs) lndieared on rlre cover. The research, engineenng. and service
departments or YAMAHA are eonrlnually smving ro improve YAMAHA produers. Modificmlons are, therefore. rnevirable and
specxtlcalions are subyecr m elranpe wilhoul nerlee or obligalion to retrofit. Should any discrepancy appear ro exlsL please eonraer rlre
dlslnbulors Serwce Dlvision.

WARNING: Sraric dlscharges can desrroy expenslye eomponenrs. Discharge any slarre eleerrieuy your body may have
aeeuruulared by groundmg yourself to rhe ground buss rn rhe unlr (heavy gauge blaek wires eonneer ro rhis buss).

r IMPORTANT: Turn the urur OFF durlnp dis .sembly and pan replaeenrenr. Recheck all work before you apply power ro rhe un .

I CONTENTS

TOSERVICEPERSONNEL 2-4
PREVENTION OF ELECTRO STATIC DISCHARGE . . . . . . 4
LOCALE MANAGEMENT INFORMATION . . . . . . . .5
FRONTPANELS 5
5
G

BISASSEMBLY PROCEDUREg/

hung 19410
BLOCKDIAGRAM...........................11
PRINTED CIRCUIT BOARD ..12-15
SCHEMATICDIAGRAM ..16-27
EXPLODEDVIEW...........................28
MECHANICAL PARTS ..23-29

REMOTE CONTROL PANEL
REARPANELS
SPECIFICATIONS/DUDE 7-8
SERVICEHINTS/DDDDDDD ................8

:04}, EX721 7714:» I 3 777%20fiifi2fifi bruit,
This Service Manual uses recycled paper.

.YAMAHA

YAMAHA CORPORATION
PO. Box 1 Hamamatsu Japan

m '04.07

OLLS S'AO/

O
<
3
UI
..r
UI
o
o

Page 2

IDV-S 5770

O
O
|n
...
V.
a
>
a

DVD-51500/DV-55770

I TO SERVICE PERSONNEL

1. Critical Components Information
Components having special characteristics are marked A
and must be replaced with parts having specifications equal
to those originally installed.

2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.

0 Meter impedance should be equivalent to 1500 ohm shunted
by 0.15m:

AC LEAKAGE
WALL EQUIPMENT TESTER OFI
OUTLET UNDER TEST EQUIVALENT
INSULATING _
TABLE

0 Leakage current must not exceed 0.5mA.

0 Be sure to test for leakage with the AC plug in both
polarities.

WARNING: CHEMICAL CONTENT NOTICE!

The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or
plastic (where applicable) components may also contain traces of chemicals found by the California Health and
Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.

DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR

ANY REASON WHATSOEVER!

Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes

or expose eyes to solder/flux vapor!

If you come in contact with solder or components located inside the enclosure of this product, wash your hands

before handling food.

WARNING: Laser Safety

This product contains a laser beam component. This
component may emit invisible, as well as visible radiation,
which may cause eye damage. To protect your eyes
and skin from laser radiation, the following precautions
must be used during servicing of the unit.

1) When testing and/or repairing any component within
the product, keep your eyes and skin more than 30 cm
away from the laser pick-up unit at all times. Do not
stare at the laser beam at any time.

2) Do not attempt to readjust, disassemble or repair the
laser pick-up, unless noted elsewhere in this manual.

3) CAUTION : Use of controls, adjustments or
performance of procedures other than those specified
herein may result In hazardous radiation exposure.

Laser Emitting conditions:

1) When the Top Cover is removed, and the STANDBY/
ON SW is turned to the ON" position, the laser
component will emit a beam for several seconds to
detect if a disc is present. During this time (5-10 sec.)
the laser may radiate through the lens of the laser pick-
up unit. Do not attempt any servicing during this period!
If no disc is detected, the laser will stop emitting the
beam. When a disc is loaded, you will not be exposed
to any laser emissions.

DDDDDDDDDDDD
I]ElDDDDDDDDDDDDDDDDDDDDDDDD
Ell]DDDDDDDDDDDDDDDDDDDDDDDD
I]ElDDDDDDDDDDDDDDDDDDDDDDDD
EIIIIEIIJEIEIIJIJEIIIIEIEIEIEIIJIJEIEIEIEIEI
I]EIEIDEIDEIEIEIDEIEIEIEIDDDEIEIEIDEIDDDD
EMBEDDDDDDDDJDDDDDDDDDD
DDDDDDDDDDDDDD
I]EDDDDDDDDDDDDDDDDDDDDDDDDD
EIIIIDDDDDDDDDDDDDDDDDDDDDIIIDD
DDDDDDDDDDDDDDDDDDDDDDDD
DDDD
DEIDDDEIDD
DDDDDDDDDDDDDSFANDBY/ONEICIEIEIEION
DDDDDDDDDDDDDDW lODDDEIIIIEIEI
DDDDDDDDDDDDDDDDDDDDDDDD
DDDDDDDDDDD
DDDDDDDDDDDDDDDDUUDDDDDD
DDDDDDDDDDDDDDDDDDDDDDDD
EEEEDDDDDDDDDDDDDDDDDDDD