Page 1
CI2
2
WARNING: This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/
flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.
IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic
service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users,
and have therefore not been restated.
WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components and failure of the product to perform as specified. For these reasons, we advise
all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.
IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authorization certification,
recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form.
The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in
specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributors Service Division.
WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated
by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus.)
IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
WARNING
Components having special characteristics are marked and must be replaced with parts having specifi cation equal to those
originally installed.
¹w
æ
¼xz-
¶-¡ËbhŠt OAs
æ
¼pb{¦õb -ùxz-
¶whŠt
žc¦ w
æ
¼-]-;-65à4Ð'°
Power supply
The power of the CI2 is supplied only from the computer via a
USB cable. A power cable is not necessary.
Precautions when using the USB connector
Be sure to observe the following points when connecting to the
computers USB interface.
Failing to do so may result in the computer freezing or shutting
down, as well as corruption or even loss of data. If the device or
computer does freeze, restart the application or computer.
CAUTION
Be sure to wake the computer from sleep/suspended/
standby mode before making a connection to the
computers USB connector.
Always quit all applications running on the computer
before connecting or disconnecting the USB cable.
When connecting or disconnecting the USB cable, be sure
to set the MASTER control to the minimum.
Wait at least 6 seconds between connecting or
disconnecting the USB cable.
?o--
$ * xz 6 4 #
