This is the 23 pages manual for Tandberg 3000 Owners Manual.
Read or download the pdf for free.
If you want to contribute, please mail your pdfs to info@audioservicemanuals.com.
TANDBERG
sums 3000): V a N D E" L;
9900-9
RECORD LEV RECORD SYARY
Instruction Manual Series 3000 X
4-track
recording
and
playback
Erasing
This section applies tor the t-track version oi Series
3000 X.
Recording
Program can be recorded on tour separate tracks.
Each track covers almost a quarter ot the tape width.
All programs are recorded on the same side at the
tape. i.e. the dull side. For practical reasona. however.
the text raters to sides 1 and 2 01 the tape. side 1
being detined as tracks 1 and 3 while side 2 is dellned
as tracks 2 end a.
Recording on channel L. with the RECORD L button
depressed. records the program on tape track 1.
When the whole length at the tape has been recorded.
turn over the tape reels and interchange so that side
2 comes up. Continuing to record on channel L. with
RECORD L button depressed. records the program on
track 4. When the track is tull. turn over and inter-
change the tape reels again so that side 1 comes up.
The next program must be recorded on track 3. and
RECORD R must theretore be depressed. When track
3 has been tilled. turn over the tape yet again so that
side 2 comes up. and record on track 2 with RECORD
R depressed.
Playbook
For mono playback It is possible to choose between
programs lrom tracks 1 and 3 by switching between
positions L and R on OUTPUT selector. Turning oven
the tape so that side 2 comes up. similarly otters a
choice between tracks 4 and 2.
When a new program ls recorded on one or two
tracks (mono or stereo). the existing programs on
these tracks are automatically erased simultaneously
with recording. it it is desired to erase a program
without making a new recording. this can be ellected
by running the tape through the tape recorder in record
position. with the RECORD LEVEL buttons set to zero.