Page 1
2
User's Manual
Safety Instructions
1. Read Instructions --“ All the safety and operation
instructions should be read before the Sunfire Component
is operated.
2. Retain Instructions - The safety and operating
instructions should be kept for future reference.
3. Heed Warnings - All warnings on the Component and
in these operating instructions should be followed.
4. Follow Instructions - All operating and other instruc-
tions should be followed.
5. Water and Moisture - The Component should not be
used near water - for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, etc.
6. Ventilation - The Component should be situated so
that its location or position does not interfere with its
proper ventilation. For example, the Component should
not be situated on a bed, sofa, rug, or similar surface that
may block any ventilation openings; or placed in a built-in
installation such as a bookcase or cabinet that may
impede the flow of air through ventilation openings.
7. Heat - The Component should be situated away from
heat sources such as radiators, or other devices which
produce heat.
8. Power Sources - The Component should be connected
to a power supply only of the type described in these opera-
tion instructions or as marked on the Component.
9. Power Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked upon or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit the Component.10. Cleaning - The Component should be cleaned only
as recommended in this manual.
11. Non-use Periods-The power cord of the Component
should be unplugged from the outlet when unused for a
long period of time.
12. Object and Liquid Entry - Care should be taken so
that objects do not fall into and liquids are not spilled into
the inside of the Component.
13. Damage Requiring Service - The Component should
be serviced only by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has spilled into the
Component; or
C. The Component has been exposed to rain; or
D. The Component does not appear to operate normally
or exhibits a marked change in performance; or
E. The Component has been dropped, or its cabinet damaged.
14. Servicing - The user should not attempt to service
the Component beyond those means described in this
operating manual. All other servicing should be referred to
qualified service personnel.
Safety Instructions
