Page 1
PLEASE READ CAREFULLY BEFORE USE
FAILURE TO FOLLOW THE INSTRUCTIONS PRINTED BELOW MAY VOID WARRANTY
- Follow all security advice printed on your mixer
- When removing the unit's AC plug from the power source, grasp and pull
the plug, NEVER the cord itself!
- Avoid placing your mixer near heat sources, such as power amplifiers.
- When in use, place your mixer on a stable surface, away from vibration.
Always use care when carrying your mixer. Impact, or heavy vibration may
compromise the unit's mechanical integrity. The manufacturer is not
responsible for damage resulting from an impact, or misuse.
- When in use, place your mixer away from sources of hum or noise, such as
transformers, or electric motors.
- To prevent overheating, always provide your mixer with adequate
ventilation air space.
- Avoid stepping on your mixer's AC cord. Repeated compression of the cord
may lead to electrical shorting.
- To avoid damage due to AC voltage peaks, always disconnect your mixer
from the power source during electrical storms. If possible connect mixer to
a surge protector.
- Your mixer contains no user serviceable parts. The manufacturer is not
responsible for any damage or personal injury resulting from unauthorized
user servicing or modifications. In addition, the warranty will be void if any
unauthorized service by the user is detected. Always return your mixer to
an authorized Stanton dealer for servicing.
Thank you for making Stanton your
first choice in professional DJ
mixers.
This innovative family of mixers
has been developed with input
from the professional DJ
community, bringing a previously
unavailable, combination of user
friendly, functional design, rugged
construction, and professional
quality features together at anafforfable price. Stanton and your
authorized Stanton dealer are ded
icated to your complete
satisfaction by offering benchmark
service and support throughout the
long life of your Stanton
product.
We appreciate your patronage, and
look forward to many years of mak
ing music together.
WELCOME!
Page 2
Removing a fader :
1. Make sure mixer is powered off and power supply is disconnected from
back of mixer.
2. Remove the fader to be cleaned or replaced by unscrewing the 2 outer
screws on the fader plate (removing the 2 inner screws will detach the
fader from the fader plate).
3. Disconnect the fader from mixer by removing the connector on the
bottom of the fader.
Installing a fader :
1. Once original fader has been removed, simply plug the 4 pin
connector into the new fader.
2. Place fader back in mixer and replace 2 outer screws to secure fader. After constant use the faders may need to be cleaned and lubricated
from time to time. This will ensure long life and keep a smooth feeling
throughout the fader's lifetime. Follow the instructions below to lubricate
and clean your faders:
FADER CLEANING AND INSTALL
