Sony rdr gx 315 owners manual

Page 1

SONE

DVD Recorder

Operating Instructions

RDR-GX31 5

24537-174420)

For customers In the U.S.A

Owner's Record

The model and serial numbers are learned at me rear of the unit.
Record the serial number in the space provided below. Refer to them
whenever you call upon your Sony dealer regarding this product.
Model No. RDR-GX3 15

Serial No.

an a We if

nvn eernhle vmzo/n/kw

© 2005 Sony Corporation

For cusromers In Canada

1: this product is networking properly, please call 1-877-602-2008 for
Peace 01 Mind Warranty Replacemenl service.

For other producr relaved questions please Conlflcl our Cuslomer
lnlormatlon Service Cenlre at 1-877-899-7669 or write to us ar:
Cusmmer Information Service 115 Gordon Baker Road Town).
Ontario. MZH 3R6

Page 2

WARNING

To reduce the risk of tire or
electric shock, do not expose
this apparatus to rain or
moisture.

To avoid electrical shock, do not
open the cabinet. Refer servicing
to qualitied personnel only.

The AC power cord must be
changed only at a qualified
service shop only.

CLASS i LASER PRODUCT
LASER KLASsEi

LUOKAN l LASERLAITE
KLASS l LASERAPPARAT

This appliance is classified as 2:
CLASS I LASER product. The
CLASS I LASER PRODUCT
MARKlNG is located on the rear
exterior.

CAUTION

The use of optical instruments with this
product will increase eye hazard. As
the laser beam used in this DVD
recorder is harmful to eyes. do not
attempt to disassemble the cabinet.
Refer servicing to qualified personnel
only.

This symbol is intended
to alert the user to the
presence of uninsulated
dangerous voltage"
within the products

enclosure that may be of sufficient

magnitude to constitute a risk of
electric shock to persons.

This symbol is intended
to alert the user to the
presence of important
operating and
maintenance (servicing)

instructions in the literature

accompanying the appliance.

CAUTION

TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG
TO WIDE SLOT. FULLY INSERT.

CAUTION

You are cautioned that any change or
modifications not expressly approved
in this manual could void your
authority to operate this equipment.

This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
l5 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential insmllatjon. This
equipment generates, uses, and can
radiate radio frequency energy and. if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception. which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:

7 Reorient or relocate the receiving
antenna.

7 Increase the separation between the
equipment and receiver.

7 Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.

7 Consult the dealer or an experienced
radio/1' V technician for help.

Precautions

0n safety

Should any solid object or liquid fall
into the cabinet, unplug the recorder
and have it checked by qualified
personnel before operating it any
further.

0n power sources

- Operate the recorder only on

120 V AC, 60 Hz.

The recorder is not disconnected
from the AC power source as long
as it is connected to the wall outlet,
even if the recorder itself has been
turned off.

If you are not going to use the
recorder for a long time, be sure to
disconnect the recorder from the
wall outlet. To disconnect the AC
power cord, grasp the plug itself;
never pull the cord.

[In placement

- Place the recorder in a location
with adequate ventilation to
prevent heat build-up in the
recorder.

If the recorder is brought directly
from a cold to a warm location, or
is placed in a very damp room,
moisture may condense on the
lenses inside the recorder. Should
this occur. the recorder may not
operate properly. In this case,
remove the disc and leave the
recorder tumed on for about half
an hour until the moisture
evaporates.

Do not place the recorder on a soft
surface such as a rug that might
block the ventilation holes.

Do not place the recorder in a
confined space such as a bookshelf
or similar unit.

Do not place the recorder in a
location near heat sources, or in a
place subject to direct sunlight.
excessive dust, or mechanical
shock.

Do not place the recorder in an
inclined position. It is designed to
be operated in a horizontal
position only.