Page 1
2
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, table-cloths, curtains, etc.
And don't place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
CAUTIONYou are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
WARNINGThis equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
-“ Reorient or relocate the receiving antenna.
-“ Increase the separation between the equipment and
receiver.
-“ Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-“ Consult the dealer or an experienced radio/TV
technician for help.
As the laser beam used in this unit is harmful to eyes,
do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
The following caution label is located inside the
apparatus.
This symbol is intended to alert the user
to the presence of uninsulated
dangerous voltage within the
products enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
For the customers in the U.S.A.
Don't throw away the battery with
general house waste, dispose of it
correctly as chemical waste.
This appliance is classified as a CLASS 1 LASER
product.
This label is located on the rear exterior.
The following caution label is located inside the
apparatus.
FOR THE CUSTOMERS IN CANADAThis Class B digital apparatus complies with
Canadian ICES-003.
CAUTIONTO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
Page 2
3
Contents
Getting Started
Unpacking ............................................. 6
Hooking Up the System ........................ 6
This Unit Can Use the Following Discs 7
Basic Operations
Playing a CD ......................................... 8
Using the Display .................................. 9
Locating a Specific Track .................... 11
Locating a Particular Point in a Track .... 12
Playing Tracks/Discs Repeatedly
(Repeat Play) ................................. 13
Playing in Random Order
(Shuffle Play) ................................ 14
Creating Your Own Program
(Program Play) .............................. 15
Recording/Editing
Notes on Recording ............................. 16
Useful Tips for Recording ................... 16
Synchro-Recording a CD to CD-R or
CD-RW ......................................... 18
Recording on a CD-R or CD-RW
Manually ....................................... 20
Adjusting the Recording Level ............ 21
Marking Track Numbers While
Recording ...................................... 22
Recording the Original Sound of the
Program Source
(Direct Recording Function) ......... 23
Fading In and Out (Fader) ................... 23
Finalizing a CD-R or CD-RW ............. 24
Unfinalizing a CD-RW ........................ 25
Erasing Tracks of a CD-RW ............... 25
Labeling Tracks/Discs ......................... 26
Additional Information
Using the Setup Menu ......................... 28
Messages ............................................. 29
Self-diagnosis Function ....................... 30
System Limitations .............................. 30
Troubleshooting ................................... 31
Specifications ........................ Back cover
