Page 1
2
WARNING
To prevent fire or shock
hazard, do not expose the unit
to rain or moisture.
Do not install the appliance in a
confined space, such as a bookcase
or built-in cabinet.
To prevent fire, do not Cover the
ventilation of the apparatus with
news papers, table-cloths, curtains,
etc. And donÕt place lighted candles
on the apparatus.
To prevent fire or shock hazard, do
not place objects filled with liquids,
such as vases, on the apparatus.
This appliance is classified as a
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the rear
exterior.
This label is located on the Laser
protective housing inside the
enclosure.
(Only for European and Russian
models)
DonÕt throw a
battery, dipose it
as the injurious
wastes.
PrecautionsSafety
¥ If anything falls into the cabinet,
unplug the unit and have it
checked by qualified personnel
before operating it any further.
¥ The unit is not disconnected from
the mains as long as it is
connected to the mains outlet,
even if the unit itself has been
turned off.
¥ Unplug the unit from the wall
outlet if you do not intend to use it
for an extended period of time. To
disconnect the cord, pull it out by
the plug, never by the cord.Installing
¥ Do not install the appliance in a
confined space, such as a bookcase
or built-in cabinet.
¥ Allow adequate air circulation to
prevent internal heat buildup.
¥ Do not place the unit on surfaces
(rugs, blankets, etc.) or near
materials (curtains, draperies) that
may block the ventilation slots.
¥ Do not install the unit near heat
sources such as radiators, or air
ducts, or in a place subject to
direct sunlight, excessive dust,
mechanical vibration, or shock.
¥ Do not install the unit in an
inclined position. It is designed to
be operated in a horizontal
position only.
¥ Keep the unit and discs away from
equipment with strong magnets,
such as microwave ovens, or large
loudspeakers.
¥ Do not place heavy objects on the
unit.
¥ If the unit is brought directly from
a cold to a warm location,
moisture may condense inside the
Compact AV System and cause
damage to the lenses. When you
first install the unit, or when you
move it from a cold to a warm
location, wait for about 30 minutes
before operating the unit.
