Sony CDP C87ES Owners Manual

Page 2

WARNING

To prevent fire or shock hazard, do not
expose the unit to rain or moisture.

ersx or ascrmc snocx
00 «0 crew

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.

00 NOT aEMOVE COVER tOR BACK)
NO USERSERWCEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol is intended to alert the user
to the presence of uninsuiated
"dangerous voltage" within the products
enclosure that may be of sufficient
magnitude to consititute a risk of electric
shock to persons.

This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions in
the literature accompanying the appliance.

INFORMATION
This equipment generates and uses radio frequency
energy and if not installed and used property. that is. in
strict accordance with the manufacturer's instructions. may
cause interference to radio and television reception. It has
been type tested and found to comply with the limits for a
Class B computing device in accordance with the
specifications in Subpart J of Part 15 of F00 Rules, which
are designed to provide reasonable protection against
such interference in a residential installation. However.
there is no guarantee that interference will not occur in a
particular installation. it this equipment does cause
interference to radio or television reception. which can be
determined by turning the equipment off and on. the user
is encouraged to try to correct the interference by one or
more of the following measures:

Reorient the receiving antenna

Relocate the equipment with respect to the receiver

Move the equipment away from the receiver

Plug the equipment into a different outlet so that

equipment and receiver are on different branch circuits.
If necessary, the user should consult the dealer or an
experienced radio/television technician for additional
suggestions. The user may find the following booklet
prepared by the Federal Communications Commission
helpful:
How to identify and Raolve Radio-TV interference
Problems".
This booklet is available from the us Government
Printing Office. Washington. DC 20402, Stock No. 004-
coo-003454.

O

Owners Record

The model and serial numbers are located at the rear.
Record these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your Sony
dealer regarding this product.

Model No. Serial No

For the customers In Australia

This Compact Disc player is
classified as a CLASS 1
LASER product.

The CLASS 1 LASER
PRODUCT label is located
on the rear exterior.

Differences by Model

This instruction manual covers the CDPvC77ES and the
CDP-Ca7ES. Their performance and operation is identical
except for the following:

GDP-08768 comes with a SERIAL CHAIN terminal and
CONTROL 8 lN/OUT terminals.

Note on the Transit Key

The transit key and the red lock screw (COP-08758 only)
on the bottom exterior of the unit protects the optical
system against shock during transportation. Before
operating the CD player. he sure to remove the key and
red lock screw (CDP~087ES only) by following the
instmctions on the label. and store it in a safe place.

When transporting the unit. replace the key and red lock

screw (GDP-087ES only) in its original hole and lock it in

place.

fie-Install the red look screw

1. Open the disc compenment by pressing the a
OPEN/CLOSE button.

2. Press the DISC SKIP button until disc tray 1 is at the
front

3. Close the disc compartment by pressing the a
OPEN/CLOSE button.

4. Wait for the Q (DISC 1) indicator to blink before turning
the power off. Re-install the transporting lock screw.