Page 1
2
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
The AC power cord must be changed only at a qualified
service shop.
Batteries or batteries installed apparatus shall not be
exposed to excessive heat such as sunshine, fire or the
like.
CAUTION
The use of optical instruments with this product will
increase eye hazard. As the laser beam used in this Blu-
ray Disc/DVD player is harmful to eyes, do not attempt
to disassemble the cabinet.
Refer servicing to qualified personnel only.
This label is located on the laser protective housing
inside the enclosure.
This symbol is intended to alert the user to
the presence of uninsulated dangerous
voltage within the products enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the
appliance.
Precautions
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Install this unit so that the AC power cord can be
unplugged from the wall socket immediately in the
event of trouble.
FCC WARNING
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
The shielded Interface cable (LAN cable) must be
used with the equipment in order to comply with the
limits for a digital device pursuant to Subpart B of
Part 15 of FCC Rules.
bThis equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
-“ Reorient or relocate the receiving antenna.
-“ Increase the separation between the equipment
and receiver.
-“ Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-“ Consult the dealer or an experienced radio/TV
technician for help.
Important Safety Instructions1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
Page 2
3
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Owners Record
The model and serial numbers are located at the rear of
the unit. Record the serial number in the space provided
below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No.______________
Serial No.______________
For customers in the USA
If this product is not working properly, please call
1-866-909-7669.
For Customers in Canada
If this product is not working properly, please contact
our Customer Information Service Center at
1-877-899-7669 or write to us at: Customer
Information Service 115 Gordon Baker Road, Toronto,
Ontario, M2H 3R6
Precautions
This equipment has been tested and found to
comply with the limits set out in the EMC Directive
using a connection cable shorter than 3 metres.
On placement
Place the player in a location with adequate
ventilation to prevent heat build-up in the player.
Do not place the player on a soft surface such as
a rug that might block the ventilation holes.
Do not install this player in a confined space, such
as a bookshelf or similar unit.
Do not place the player in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
Do not place the player outdoors, in vehicles, on
ships, or on other vessels. If the player is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lenses inside the
player. Should this occur, the player may not
operate properly. In this case, remove the disc and
leave the player turned on for about half an hour
until the moisture evaporates.
Do not install the player in an inclined position. It
is designed to be operated in a horizontal position
only.
Do not place heavy or unstable objects on the
player.
Do not place any objects other than discs on the
disc tray. Doing so may cause damage to the
player or the object.
Take out any discs when you move the player. If
you dont, the disc may be damaged.
Disconnect the AC power cord and all other
cables from the player when you move the player.
On power sources
The player is not disconnected from the AC
power source as long as it is connected to the wall
outlet, even if the player itself has been turned off.
Disconnect the player from the wall outlet if you
are not going to use the player for a long time. To
disconnect the AC power cord, grasp the plug
itself; never pull the cord.
Observe following points to prevent the AC
power cord being damaged. Do not use the AC
power cord if it is damaged, as doing so may
result in an electric shock or fire.
-“ Do not pinch the AC power cord between the
player and wall, shelf, etc.
-“ Do not put anything heavy on the AC power
cord or pull on the AC power cord itself.
On adjusting volume
Do not turn up the volume while listening to a
section with very low level inputs or no audio
signals. Your ears and the speakers may be
damaged when the sound level reaches the peak.
On cleaning
Clean the cabinet, panel, and controls with a soft
cloth. Do not use any type of abrasive pad, scouring
powder or solvent such as alcohol or benzine.
On cleaning discs, disc/lens cleanersDo not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause the
apparatus to malfunction.
On replacement of parts
In the events that this player is repaired, repaired
parts may be collected for reuse or recycling
purposes.