Shure m 105 e owners manual
This is the 8 pages manual for shure m 105 e owners manual.
Read or download the pdf for free.
If you want to contribute, please mail your pdfs to info@audioservicemanuals.com.
Extracted text from shure m 105 e owners manual (Ocr-read)
Page 1
sun I 222 HARTREY AVE . EVANSTON. IL
some-3395 u s A
n PHONE 312/865-2200 - CABLE SHUR£MICFIO M 1 055
mu FIOILITV IUDlO vacuum
SPECIFICATIONS
25 dB 1 ZSgums I 75 gram; 4w H125 (meet
at Optimum Opt-mum Lin) H145 muse:
1 kHz 1 5 grams 2 0 grams mono Flt-23 (misc:
Maximum Maximum at 1.25 grams
N1OSE. Biradial
(elliptical) S x 18;
((1)02 x ()7 in)
tOutput voltages given for stereo cut record. lor MONO cut record, output voltage at both left chan-
nel and right channel cartridge terminals will be 71% oi ilgures above.
'00 not exceed maximum Indicated tip tracking force or total tone arm force.
"See section on tracking iorce.
Optimum Load: 47.000 ohms resistance In parallel with 200 to 300 picoiarads capacitance per
channel. Load resistance can be up to 70,000 ohms with almost no audible change in frequency
response. Total capacitance Includes both tone errn wiring and amplifier input circuit.
Net Weight: 7.8 grams including standard Va in. mounting adapter. Without adapter cartridge is
compatible with pro-eat P-Mount arms.
Page 2
THIS CARTRIDGE INCLUDES THE SHURE EXCLUSIVE DESTATICIZER
Wise fibers neutralize static charges on the record
surface and conduct them to ground.
Because the Destatlcizer excludes static trom the amplifier
and speakers, static-caused clicks and pops are eliminated
from the audio system. in addition. the conductive libero
prevent static charges. either on the record or on the turn-
table dustcover. lrom attracting or repelling the tone arm.
The srrn-torecord distance. the tracking angle, and the
tracking torce remain constant; and the cartridge retains
its full potential tracking ability.
The Destatlclzers tiny groovecontect tibers reach down in
to the groove and sweep away lntertarlng dust and grit. The
Deetatlclzer contains more than 10.00.) individual tlbers
with an average diameter at 7. By (.0008 in.) each. Because
the groove is swept clean before the stylus rsechee it, the
stylus trucks the groove and not the dust. Reproduction is
enhsnced. and both record and stylus 1113 are prolonged
~ because the dust particles are prevented from emitting
either the groove or the diamond tip.
THIS CARTRIDGE IS EQUIPPED WITH THE SHURE EXCLUSIVE SIDE-GUARD
STYLUS PROTECTION SYSTEM
The SIDE-GUARD responds to accidental side thrusts
on the stylus by withdrawing the entire shank and tip
salely Into the stylus housing before damage can 00-
STYLUS SHARK W"
STYLUS TIP
Copyrtght 1. Shore Brothers inc.
21m (PK) Printed in USA.