Free Audio Service Manuals - Free download Rotel RD 1010 OM

Page 2

INTRODUCTION

We at Rotel want to thank you for
purchasing our audio product.
Rotel audio products are designed
to use the latest electronic techno-
logy, and they incorporate our long
experience as a specialist manufac-
turer of audio equipment. We are
confident that you will find satis
faction in the high quality sound
and top performance, and that you
will find pleasure in the functional
beauty achieved through human-
engineering concept. Before start-
ing operation, please read this
instruction manual thorougtlv and
acquaint yourself with the proper
mode of using the unit and all
its connections.

We hope you will enjoy top-notch
performance for many years to
come.

POWER SUPPLY

For power the unit requires the
normal house electrical current
(AC). You may simply plug the
unit into a wall outlet, or into your
amplifiers switched or unswitched
AC outlet. If it is plugged into a
switched outlet, by leaving the
power switch of the unit on, you
will be able to maintain switch-
ing control tor the RD~1010 with
your amplifier. If it is connected to
an unswitched outlet, like connect-
ing to a wall outlet you must use
the RD-1010s own power switch
for switching control.

CAUTION: Do not apply power
without first making sure the
proper connections are completed.
If you live in U.K. and your unit
comes with 2~core cord without a
plug. be sure to read the exclusive
caution for U.K.

INSTALLATION

Be sure to place the unit in a level
and flat place where it is free from
humidity, vibration, high tempera-
ture and not exposed to direct
sunlight. Be careful not to place the
unit in a highly enclosed place such
a near a wall or on a bookshelf. A
poor ventilation will cause undesira-
ble effects to the unit.

CONNECTION TO INTE-
GRATED AMPLIFIER

Using the two accompanying pairs
of RCA pin cords, connect LINE
IN and OUT terminals on the back
of deck with TAPE MONITOR ter-
minals of the amplifier. Make sure
LINE IN terminals are connected
to TAPE MONITOR OUT termi-
nals, and LINE OUT terminals to
TAPE MONITOR IN terminals. Be
sure to match L (left) and R (right)
terminals of the components. To
make correct connections, use
cords with white plugs for left
channel connections, and cards
with red plugs for right channel
connections.

RD-101O

EXCLUSIVE NOTE FOR
U.K.

If your unit comes with a 2
core cable without a plug. make
certain live and neutral leads
are connected to the proper
terminals. Check that the ter-
minals are screwed down firmly
and no loose strands of wire are
present.

IMPORTANT: The wires in this
mains lead are coloured in ac
cordanca with the following

code:
BLUE: NEUTRAL
BROWN: LIVE

As the colours of the wires in
the mains lead of this apparatus
may not correspond with the
coloured markings identifying
the terminals in your plug pro-
ceed as follows.

The wire which is coloured
BLUE must be connected to the
terminal which is marked with
the letter N or coloured BLUE
or BLACK. The wire which is
coloured BROWN must be con-
nected to the terminal which is
marked with the letter L or
coloured BROWN or RED.

TAPE MONITOR

INTEGRATED AMP (or RECEIVER, PRE-AMP)

Rotel RD 1010 OM

Extracted text from Rotel RD 1010 OM (Ocr-read)

Page 1

Page 2