Pioneer pd 75 service manual

Page 2

l

This service manual is intended for qualified service technician

t is not

meant for the casual do-it-yourselfer. Qualified technicians have the neces
sary test equipment and tools, and have been trained to properly and safely
repair complex products such as those covered by this manual.

Improperly performed repairs can adversely affect the safety and reliability
of the product and may void the warranty. if you are not qualified to
perform the repair of this product properly and safely, you should not risk
trying to do so and refer the repair to a qualified service technician.

WARNING

Land in solder used in this product is listed by the California Health and Wcliarc agency as

I known reproductive to

lit which may cause birth detects or other reproductive harm
(California Health at Sclety code, section 25249.5).

Whlll ulrvl it; or handling circuit boards and other components which contain lead in
solder, avoid unprotected skin contact with the solder. Also, when sold-ring do not inhale

any smoke or 'Umei produced.

1. SAFETY INFORMATION

[FOR USA MODEL oNLvlc r

LSAFETV PHECAUYIONS

The lolloirvinp check should he perlormcd lot this
continued pratactipn al the customer and servlce
technician.
LEAKAGE CURRENT chEcx

Measure leakage current to 5 Known earth ground
(water pipe, conduit, etc.i py connecting a leakage
current tustur such as simpson Model 229-2 or
equivalent between the ssrth ground and all exposed
metal parts at the appliance linputicutput terminals,
screwhcsds. metal overlays, control shalt, etc i Plug
the AC line card or the appliance directly into a may
AC GOHz outlet and turn the AC power swllch on Any
current maasurad must not exceed 0.5mA.

Reading should

novice

rest .ii
ricotta met-ll
suriscrr

a wire cpid

dist tart untn
piuE levelled
lucinp AC sdtctei
plug ls rsdurtci

ttrrh
Evpund

At: Leakage Test

ANV MEASUREMENTS NoT WIYMIN THE Lllvllrs
OUTLINED ABOVE ARE lNDlCATlVE or A PD-
TENTIAL SHOCK HAIARD AND Musr aE coa-
RECTED serene RETURNING YHE APPLIANCE To
THE EUSTDMER.

2,PRopucT SAFETY NOTICE

Many electrical and mechanical parts in the appll'
once have specialsaiety related charsctsri 'cs These
are olten not evident iront visual inspection nor the
protection silorded by them necessarily can he ch-
lained py using replacement components rated lot vols
tags, wattage. etc, Replacement parts which have
thosa special sslety characteristics are ldentilied in
this Service Manual.

Electrical components having such lectures are

idohtilied by marking with a A on tho schematlcs and
on the parts list in this service Manual,
The use or a suostltute replacement component which
dose not have the same sarcty characteristics as the
PIONEER recommended replacement one, shown in
the pans list in this Semlce Manual. may create shock.
rira. or other hazards,

Product Safety is Donilrluouslv under review and
new instructions are issued lroni time to time. For
the lrrtast inlormatron. always consult the current
PIONEER Sarvtce Manual. A supscription to. or Id'
ditionaI copies oi. PlONEER Service Manual may he
obtained at a nominal charge rrcnt PlDNEER.