Page 1
Drive System
Motor
Speeds
Tonearm
Operation
Length (pivot to stylus)
Mass
Overhang
Cartridge weight
Verticle tracking force
Cable capacitance
Cartridge specification
Transducer
Frequency response
Channel balance
Channel separation
Output Level
Static compliance
Equivalent tip mass
Verticle tracking angle
Stylus radius
Stylus Type
Electrical characteristics
Load resistance
Load capacitance
Internal inductance
Internal resistance
Physical Specifications
Dimensions (W x H x D)
Net Weight
Shipping WeightBelt drive
High torque synchronous,
extra low vibration 33.3 & 45.1rpm
One piece diecast aluminum
Manual
244mm 9g
19.1mm 4.2g
1.75g
150 -400pF
Goldring Electra Moving Magnet
±3dB, 20Hz-20kHz 2dB at 1kHz
20dB at 1kHz
5mV ±2dB at 1 kHz at 5cm/s 16mm/N0.7mg 26°
r/R 7/18µm D152E
47kΩ
150-400pF 560mH700Ω
17 3/8 x 4 9/16 x 14 447x 115 x 356mm11.57 lbs (5.25kg)15.21 lbs (6.9kg) Belt drive
High torque synchronous
33.3 & 45.1rpm
Three piece aluminum/ABS polymerManual
244mm 9g
19.1mm 5.0g
1.75g
150 -400pF
Ortofon OM5E
Moving Magnet
±2dB, 20Hz-20kHz 2dB at 1kHz
22dB at 1kHz
4mV ±2dB at 1 kHz at 5cm/s 16mm/N0.7mg 20°
r/R 8/18µm 5E
47kΩ
200-400pF 450mH750Ω
17 3/8 x 4 9/16 x 14 447x 115 x 356mm11.57 lbs (5.25kg)15.21 lbs (6.9kg)
NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics International. All rights
reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written permission of NAD Electronics International. © 03/08 NAD Electronics International. Printed in Canada.
www.NADelectronics.com
NAD C 555iNAD C 552
Specifications
