Page 1
PRE-AMP SECTION
Phono input
Input impedance
(R and C) 47k½/ 100pF
Input sensitivity, (1kHz, ref. rated power) 3.2mV
Signal/Noise ratio (A-weighted with cartridge connected) 76dB ref. 5mV
THD (20Hz - 20kHz) <0.04%
RIAA response accuracy (20Hz - 20kHz) ±0.5dB
Line level inputs
Input impedance
(R and C) 15k½/ 100pF
Input sensitivity (ref. rated power) 160mV
Maximum input signal >10V
Signal/Noise ratio
(A-weighted ref 1W) 88dB
Frequency response (20Hz - 20kHz) ±0.5dB
Infrasonic filter -3db at 15Hz, 24dB/octave
THD 0.01%
Line level outputs
Output impedance Pre-amp 600½
Tape Source Z + 1k½
Phones 220½
Maximum output level 12V
Tape 8V
Phones >10V into 600½
>500mV into 8½
Tone controls
Treble ±7dB at 10kHz
Bass ±10dB at 50Hz
Bass EQ +3dB at 70Hz
+6dB at 40Hz
POWER AMP SECTION
Continuous output power into 8½* 40W (16dBW)
Rated distortion
(THD 20Hz - 20kHz) 0.03%
Clipping power (maximum continuous power per channel) 50W
IHF Dynamic headroom at 8½+6dB
IHF dynamic power
(maximum short term power per channel) 8½160W (22dBW)
4½200W (23dBW)
2½250W (24dBW)
Damping factor
(ref. 8½, 50Hz) >50
Input impedance 22k½/ 880pF
Input sensitivity
(for rated power into 8½) 1V
Frequency response 6Hz - 50kHz +0, -3dB
Signal/noise ratio ref. 1W 100dB
ref. rated power 116dB
THD
(20Hz - 20kHz) <0.03%
Remote No
NAD Link No
PHYSICAL SPECIFICATIONS
Dimensions (W x H x D) 420 x 108 x 380mm
Net weight 6.7kg
Shipping weight 8.0kg
Power consumption
(120 ~ 240V, 50/60Hz) 230VA
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.
Dimensions are of unitÕs cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE
