Meridian audio g 56 brochure

This is the 2 pages manual for meridian audio g 56 brochure.
Read or download the pdf for free. If you want to contribute, please mail your pdfs to info@audioservicemanuals.com.

Page: 1 / 2
left right
meridian audio g 56 brochure

Extracted text from meridian audio g 56 brochure (Ocr-read)


Page 1

amplifi ers feature active bias control throughout, with thermal sensing that carefully manages the temperature and current fl ow at different volume levels. Fully DC-coupled, the signal path contains no capacitors, while those in the power supplies are audiophile grade components. The amplifi ers are of a unique low-feedback design for minimum transient and interface dis- tortion, offering superb clarity and transparency right across the audible range, with an output impedance that is close to zero and suitable for virtually any high-quality third-party passive loudspeaker system. Trigger capability allows the G56 to be switched on remotely by means of a signal from your pre- amp. Trigger and other control signals are opti- cally isolated from the amplifi er itself. When in stand-by mode, a standing voltage is maintained on the power rails and supply components. As a result, you do not have to wait for half an hour after switching on for optimum performance to be achieved: it is there immediately. Two sets of outputs are provided per chan- nel for bi-wiring, etc, on sturdy binding posts colour-coded for easy reference and capable of handling large-diameter high-quality loudspeak- er cables. The output terminals are connected to the amplifi ers by Van den Hul silver-strand cable to avoid signal losses. The amplifi er can be operated in bridge mode by actuating a switch on the rear panel, in which case the left channel input becomes the input for the bridged pair and the inner output terminals are bridged, power being derived from the outer terminal pairs (see rear panel diagram). The amplifi ers include electronic protection reset by power-cycling, with full DC and thermal protection. A front-panel indicator shows when the ampli- fi er is in standby. When the unit is activated, an LED illuminates for each channel. In the event of thermal overload, the main indicator goes red and the channel lights go out, showing that the unit is off-line. A pushbutton on the front panel can be used to take the unit in and out of stand- by, while fl exible 5-“30V AC/DC trigger capability allows amplifi er power to be controlled remotely along with the rest of a system. Outline Specifi cations Power Output: 2 channels at 100W into 8 Ω, or 1 channel at >300W into 8 Ω (bridge mode) Distortion : Less than 0.01% input to output Signal/Noise : Better than -“100dB Inputs : Balanced on XLR-3F connectors and unbalanced on phono Outputs : 2 output sets per channel, terminal posts Construction : 4 pairs of 15amp output devices per channel, and a total of 27,200µF of audiophile-grade PSU smooth- ing capacitors (2 per channel). Ultra low impedance error-corrected output stage. DC coupled, with no capacitors in the signal path. Soft start and thermal management in main assembly. Optimised magnetic design based on DSP8000. Meridian black or silver fi nish in metal & glass Dimensions : Width: 440mm (17.32in); Depth: 350mm (13.78in) plus connectors; Height: 90mm (3.54in) Rack Mounting : Kit available from Meridian authorized dealers Weight : 13.5 kg (29.7 lbs) Controls : Rear-panel power switch; per-channel switches for balanced or single-ended input; Bridge/Stereo mode switch Trigger : Wide voltage-range (5-“30V, AC/DC) trigger input for remote standby/on switching Display : Power/Fault indicator and per-channel operation LEDs Power: Versions: 100, 110, 115, 220, 230, 240 Vac, 50/60Hz. Standby 11VA, Idle 45VA, Both channels driven 322.5VA G56 rear panel Meridian Audio Limited Stonehill, Stukeley Meadows Huntingdon, Cambridge PE29 6EX UK Tel +44 (0) 1480 445678 Fax +44 (0) 1480 445686 Meridian America Inc 3800 Camp Creek Parkway Building 2400 Suite 122 Atlanta GA 30331 USA Tel +1 (404) 344 7111 Fax +1 (404) 346 7111 Email: info@meridian-audio.com Web: www.meridian-audio.com G56 2-Channel Power Amplifi er Information contained in this data sheet is correct as far as possible, but Meridian Audio accepts no liability for errors or omissions. Trademarks are the property of their respective owners. Meridian Audio reserves the right to amend product specifi cations at any time. Further technical details, images, product reviews and company history are available from Meridian Audio or from our web site, www.meridian-audio.com ©Text & images 2003 Meridian Audio Ltd. G56DS v3.0 - 20.10.03 RE