Meridian audio 103 owners manual

Page 1

BOOTHPOVS STUNT/MERIDIAN

Page 2

PRODUCT REAR VIEW Labels exposed

PLUG POSITIONS aligned for insertion

DC CONNECTIONS Power supply to Amplifier

SIGNAL CONNECTIONS Control Unit to Amplifier

MAINS POWER CONNECT IONS

The Boothroyd Stuart Meridian range of high fidelity units
have been designed for the most discerning listener who
requires discrete equipment of top performance. Whilst the
units are very simple to instal we recommend that you read
these insuuctions to obtain the best results - we draw
particular attention to the note on maintenance.

Positioning The units an be operated in any position with-
out a change in performance, but for example, if the three
units - power supply, power amplifier and control unit are
stacked or laid side by side we suggest that the power
amplifier is placed between the control unit and the power
supply and that in the vertical format the power supply is
at the base. It is not essential that this plan is used. It is
possible to instal the power amplifier and power supply
some distance from the control unit. Please take your
dealer's advice on this. The lad between power amplifier
and power supply must not be extended. Avoid standing
the power amplifier on delicate surfaces. Don't constrict
airflow around it since it is designed to lose heat through its
outer case. Under heavy duty the case can rise to higher
temperature than normal but the unit will automatically
cut out should the temperature rise beyond a safe level and
reconnect upon cooling. No damage will be sustained
should this happen.