Page 1
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards. There are, however,
some installation and operation precautions which you should be particularly aware of. 1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacture's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Remove the lens cap when using this apparatus.
Additional Safety Information!
- This product should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturers instructions have been adhered to.
- To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the
apparatus.
- When the switch is in the OFF position, the apparatus isnt completely switched-off from the
MAINS.
NOTE:This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by
tuning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures: - Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
NOTE:Changes or modifications not expressly approved
by the party responsible for compliance could void
the users authority to operate the equipment.
This Class B digital apparatus complies with
Canadian ICES-003.Cet appareil numérique de la Classe B est
conforme à la norme NMB-003 du Canada.
7 1 @ D P W " .
Page 2
CAUTION - The chance of the lamp breaking is high after
extended use. It is recommended to replace
the lamp when near the end of its designed
life. Do not use a lamp beyond the maximum
lighting time.
- When replacing lamp, call for Marantz
authorized dealer. Do not replace the lamp
yourself. It is extremely dangerous to replace
the lamp.
- If the lamp breaks, leave the area immediately
and stay away for at least 30 minutes, and
ventilate the room so as not to inhale the
mercury vapor.
- If you inhale the mercury vapor, see a
physician immediately and follow his
instructions.
ENGLISH FOREWORDThis section must be read carefully before any
connection is made to the mains supply. WARRANTYFor warranty information, contact your local
Marantz distributor. RETAIN YOUR PURCHASE RECEIPTYour purchase receipt is your permanent record of
a valuable purchase. It should be kept in a safe
place to be referred to as necessary for insurance
purposes or when corresponding with Marantz. IMPORTANTWhen seeking warranty service, it is the
responsibility of the consumer to establish proof
and date of purchase. Your purchase receipt or
invoice is adequate for such proof. FOR U.K. ONLYThis undertaking is in addition to a consumers
statutory rights and does not affect those rights in
any way. EQUIPMENT MAINS WORKING SETTINGYour Marantz product has been prepared to
comply with the household power and safety
requirements that exist in your area. COPYRIGHTRecording and playback of some material may
require permission. For further information refer to
the following:
- Copyright Act 1956
- Dramatic and Musical Performers Act 1958
- Performers Protection Acts 1963 and 1972
- Any subsequent statutory enactments and
orders
WARNINGS-“ Do not expose the equipment to rain or
moisture.
-“ Do not remove the cover from the equipment.
-“ Do not insert anything into the equipment
through the ventilation holes.
-“ Do not handle the mains lead with wet hands.
-“ Do not cover the ventilation with any items
such as tablecloths, newspapers, curtains,
etc.
-“ No naked flame sources, such as lighted
candles, should be placed on the equipment.
-“ When disposing of used batteries, please
comply with governmental regulations or
environmental public instructions rules that
apply in your country or area.
-“ Do not place anything about 1 meter above
the top panel.
-“ Make a space of about 0.2 meter around the
unit.
-“ When the projector is mounted on the ceiling,
the Ceiling Mount Kit approved by MARANTZ
must be used for installation.
-“ Do not look into the lens when the projector
is turned on. It could damage your eyesight.
-“ Unplug the projector from the wall outlet if it
is not to be used for a few days.
-“ When the switch is in the OFF position, the
apparatus is NOT disconnected from the AC
supply mains.
-“ The socket-outlet shall be installed near the
equipment and shall be easily accessible.
-“ No objects filled with liquids, such as vases,
shall be placed on the apparatus.
7 1 @ D P W " .
