Manley laboratories masteringroom sr owners manual

This is the 12 pages manual for manley laboratories masteringroom sr owners manual.
Read or download the pdf for free. If you want to contribute, please mail your pdfs to info@audioservicemanuals.com.

Page: 1 / 12
left right
manley laboratories masteringroom sr owners manual

Extracted text from manley laboratories masteringroom sr owners manual (Ocr-read)


Page 1

CONTENTS INTRODUCTION3 MAINS CONNECTIONS4 CONNECTING YOUR PREAMPLIFIER5 FIGURE 1FRONT PANEL6 FIGURE 2REAR PANEL7 OPERATIONAL NOTES8 SPECIFICATIONS9 WARRANTY10 WARRANTY REGISTRATION11 NOTES12 SECTION PAGE

Page 2

THANK YOU!... for choosing the Manley Laboratories Masteringroom-Standard Reference Preamplifier. Designed around the concept that less is more, the Masteringroom-Standard preamplifier uses the best available parts with the shortest, cleanest, signal path possible. With the use of our own C.N.C. milling machine, we can provide you with a superb sounding machine with elegant packaging. Please take a few moments to read through this manual, there may be features and information about this preamplifier that you do not know, and it is in your, and our here at Manley Labs, best interest that you do. Thank you again, and please enjoy! GENERAL NOTES LOCATION & VENTILATION The Masteringroom-Standard preamplifier must be installed in a stable location with ample ventilation. It is recommended, if this unit is rack mounted, that you allow enough clearance on the top and bottom of the preamp such that a constant flow of air can flow through the ventilation vents. We also recommend that the preamplifier be placed at least 10 inches away from its amplifier.INTRODUCTION WATER & MOISTURE As with any electrical equipment, this preamplifier should not be used near water or moisture. If liquid enters the preamplifier, it must be immediately returned to your deal for servicing. SERVICING The user should not attempt to service the preamplifier beyond that described in the owner's manual. Refer all servicing other than tube replacement to Manley Laboratories. SPECIAL NOTES Tubes may become loose during transit. Straighten and press down each tube before plugging the preamplifier into the mains socket. Furthermore, NEVER touch the tubes after the preamplifier has been switched on, the tubes become very hot during operation and should only be handled after the power has been turned off and the tubes have cooled. WARNING! TO PREVENT THE RISK OF ELECTRIC SHOCK DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONEL!