Linn Keosa Owners Manual

Page 1

IMPORTANT SAFETY INFORMATION Explanation of symbols used in this manual and on the product :This symbol is intended to alert the user to the presence of uninsulated\ dangerous voltages within the enclosure of sufficient magnitude to cause electric shock. This symbol is intended to alert the user to the presence of important m\ aintenance and servicingnformation in the instruction and service manuals. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE\ PERSONNEL. WARNING: SHOCK HAZARD. DO NOT OPEN. AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR. CAUTION: REPLACE FUSE WITH SAME TYPE AND RATING. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE. CAUTION: DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE. ATTENTION: DEBRANCHER AVANT DE REMPLACER LE FUSIBLE. General Safety Instructions : 1. Read Instructions. Read the safety and operating instructions before \ operating the appliance. 2. Retain Instructions. Retain the safety and operating instructions for\ future reference. 3. Heed Warnings. Observe all warnings on the appliance and in the opera\ ting instructions. 4. Follow Instructions. Follow all operating and use instructions. 5. Water and Moisture. Do not use the appliance near water, for example \ near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool and the like. 6. Carts and Stands. Use only with a cart or stand that is recommended b\ y the manufacturer. 6a. An appliance and cart combination should be used with care. Quick st\ ops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. 7. Wall or Ceiling Mounting. Mount to a wall or ceiling only as recommen\ ded by the manufacturer. 8. Ventilation. Site the appliance so that its location or position does\ not interfere with its proper ventilation. For example the appliance should not be situated on a bed, sofa, rug or simi\ lar surface that may block the ventilation openings; or placed in a built-in installation such as a bookcase or cab\ inet that may impede the flow of air through the ventilation openings. 9. Heat. Site the appliance away from heat sources such as radiators, he\ aters, stoves or other appliances (including amplifiers) that produce heat. 10. Power Sources. Connect the appliance to a power supply only of the t\ ype described in the operating instructions or marked on the appliance. 11. Grounding or Polarisation. Do not defeat the safety purpose of the p\ olarised or grounding type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has \ two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the prov\ ided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 12. Power Cord Protection. Route power cords so that they are not likely\ to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plu\ gs, power sockets and at the point where they exit from the appliance. 13. Protective Attachment Plug. As a safety feature the product is equip\ ped with an attachment plug containing overload protection. See the instruction manual about resetting or repla\ cing the plug. Should the plug need replacing ensure that a replacement is used which has the same overload \ protection as the original. 14. Cleaning The product should be cleaned only as recommended by the ma\ nufacturer. 15. Power lines. An outdoor antenna should be located away from power li\ nes. 16. Outdoor Antenna Grounding. If an outdoor antenna is connected to the\ tuner/receiver ensure that the antenna system is grounded to provide some protection against voltage surges and\ static build up. In the USA see article 810 of the National Electrical Code ANSI/NFPA 70 \ concerning installation requirements. 17. Unplug this apparatus during lightning storms or when unused for lon\ g periods of time. 18. Objects and liquid entry. Take care not to let objects or liquids fa\ ll into the product. 19. Damage requiring Service. The product should be serviced by qualifie\ d personnel if : a. the power cord or plug has been damaged. b. objects or liquid have fallen into the product. c. the product has been exposed to rain. d. the product does not appear to operate normally or exhibits a marked \ change in operation. e. the product has been dropped or the enclosure damaged. 20. Servicing. Dont attempt to service the product beyond that descr\ ibed in the operating instructions. All other servicing should be referred to qualified service personnel.

Page 2

1 C opyright and acknowledgements : Copyright Linn Products Limited. Linn Products Ltd., Floors Road, Waterfoot, Glasgow G76 0EP, Scotland, U.K. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the publisher. The information in this manual is furnished for informational use only, is subject to change without notice and should not be construed as a commitment by Linn Products Limited. Linn Products Limited assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. WARRANTY AND SERVICE :This product is warranted under the conditions which apply in the country of purchase. In addition to any statutory rights the customer may have we undertake to replace any parts which have failed due to faulty manufacture. To help us please ask your Linn retailer about the Linn warranty scheme in operation in your country. Warning : Refer all enquiries to authorised Linn retailers only. Unauthorised servicing or dismantling of the product invalidates the manufacturerÕs warranty. If you are in any doubt please contact your nearest Linn retailer. For information on your nearest Linn retailer contact the factory in Scotland or your national distributor. Important : Please keep a copy of the sales receipt to establish the purchase date of the product. Please ensure that your equipment is insured by you during any transit or shipment for repair. Designed and manufactured by : Linn Products Ltd. Floors Road, Waterfoot Glasgow G76 0EP Scotland, U.K. Phone: ++44 (0)141 307 7777 Fax: ++44 (0)141 644 4262 email: helpline@linn.co.uk Internet: http://www.linn.co.uk/linn