Page 1
Year 2000 Compliance
Linn has used all reasonable endeavours to ensure
that the software in the products manufactured by it
is capable of normal operation before, during and after
1 January 2000 and in respect of past, present and
future dates without replacement, alteration or upgrade
(Year 2000 Compliant). Linn, however, gives no express
warranties, representations or undertakings and to the
maximum extent permitted hereby excludes any terms,
warranties, representations or undertakings implied by
law to that effect. Linn cannot give any warranties,
representations or undertakings that non Linn software is
or will be Year 2000 Compliant or that Linns software
will be Year 2000 Compliant if used in conjunction with
non Linn products, systems or software. The Purchaser,
Installer, Retailer or Distributor will be solely responsible
for ensuring that Linns software will be Year 2000
Compliant when used in conjunction with such non
Linn software, systems or products and for any failure if
it is not Year 2000 Compliant in such circumstances.
Except to the extent implied by law and which by law
cannot be excluded, Linn shall not be liable to any party
for any costs, claims, losses (including indirect and
consequential losses) or liabilities arising from the failure
of Linns software to be Year 2000 Compliant if used in
conjunction with non Linn products, systems or software.
Page 2
IMPORTANT SAFETY INFORMATION
Explanation of symbols used in this manual and on the product:
This symbol is intended to alert the user to the presence of
uninsulated dangerous voltages within the enclosure of
sufficient magnitude to cause electric shock.
This symbol is intended to alert the user to the presence of
importance maintenance and servicing information in the
instruction and service manuals.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: SHOCK HAZARD. DO NOT OPEN.
AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION: REPLACE FUSE WITH SAME TYPE AND RATING.
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
ATTENTION: DEBRANCHER AVANT DE REMPLACER LE FUSIBLE.
This equipment has been tested and found to comply with the limits for a\
Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are\
designed
to provide reasonable protection against harmful interference in a resid\
ential
installation. This equipment generates, uses and can radiate radio frequ\
ency
energy and, if not installed and used in accordance with the instruction\
s, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.\
If this
equipment does cause harmful interference to radio or television recepti\
on,
which can be determined by turning the equipment off and on, the user is\
encouraged to try to correct the interference by one or more of the foll\
owing
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to\
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
i
