Page 1
Year 2000 Compliance
Linn has used all reasonable endeavours to ensure
that the software in the products manufactured by it
is capable of normal operation before, during and after
1 January 2000 and in respect of past, present and
future dates without replacement, alteration or upgrade
(Year 2000 Compliant). Linn, however, gives no express
warranties, representations or undertakings and to the
maximum extent permitted hereby excludes any terms,
warranties, representations or undertakings implied by law
to that effect. Linn cannot give any warranties,
representations or undertakings that non Linn software is
or will be Year 2000 Compliant or that Linns software
will be Year 2000 Compliant if used in conjunction with non
Linn products, systems or software. The Purchaser,
Installer, Retailer or Distributor will be solely responsible
for ensuring that Linns software will be Year 2000
Compliant when used in conjunction with such non
Linn software, systems or products and for any failure if
it is not Year 2000 Compliant in such circumstances.
Except to the extent implied by law and which by law
cannot be excluded, Linn shall not be liable to any party
for any costs, claims, losses (including indirect and
consequential losses) or liabilities arising from the failure of
Linns software to be Year 2000 Compliant if used in con-
junction with non Linn products, systems or software.
Page 2
i
Important safety information
Explanation of symbols used in this manual and on the product:
This symbol is intended to alert the user to the presence of
uninsulated dangerous voltages within the enclosure of sufficient
magnitude to cause electric shock.
This symbol is intended to alert the user to the presence of
important maintenance and servicing information in the instruction
and service manuals.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE
COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: SHOCK HAZARD. DO NOT OPEN.
AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION: REPLACE FUSE WITH SAME TYPE AND RATING.ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MæME TYPE.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.ATTENTION: DEBRANCHER AVANT DE REMPLACER LE FUSIBLE.
WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
MAINS PLUGSThis appliance is supplied with a non-rewireable mains plug for the
intended country.
Replacement mains leads can be obtained from your Linn retailer.
Should you need to change the plug please dispose of it carefully.
A plug with bared conductors is dangerous if engaged in a live socket.
The Brown wire must be connected to the Live (Line) supply pin.
The Blue wire must be connected to the Neutral supply pin.
The Green/Yellow wire must be connected to the Earth (Ground) supply
pin.
Please contact your retailer or a competent electrician if you are in any
doubt.
