Page 2
Important safety information
Explanation of symbols used in this manual and on the product:
This symbol is intended to alert the user to the
presence of uninsulated dangerous voltages
within the enclosure of sufficient magnitude to
cause electric shock.
This symbol is intended to alert the user to the
presence of important maintenance and
servicing information in the instruction and
service manuals.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE THE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: SHOCK HAZARD. DO NOT OPEN.
AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION: REPLACE FUSE WITH SAME TYPE AND RATING.
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME
TYPE.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
ATTENTION: DEBRANCHER AVANT DE REMPLACER LE
FUSIBLE.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
MAINS PLUGS
This appliance is supplied with a non-rewireable mains plug for
the intended country.
Replacement mains leads can be obtained from your Linn
retailer.
Should you need to change the plug please dispose of it
carefully.
A plug with bared conductors is dangerous if engaged in a live
socket.
The Brown wire must be connected to the Live (Line) supply pin.
The Blue wire must be connected to the Neutral supply pin.
The Green/Yellow wire must be connected to the Earth (Ground)
supply pin.
Please contact your retailer or a competent electrician if you are
in any doubt.
GENERAL SAFETY INSTRUCTIONS
1. Read instructions. Read the safety and operating instructions
before operating the appliance.2. Retain instructions. Retain the safety and operating
instructions for future reference.
3. Heed warnings. Observe all warnings on the appliance and in
the operating instructions.
4. Follow instructions. Follow all operating and use instructions.
5.Water and moisture. Do not use the appliance near water,
for example near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool
and the like.
6. Carts and stands. Use only with a cart or stand that is
recommended by the manufacturer.
6a. An appliance and cart combination should be used with care.
Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
7. Wall or ceiling mounting. Mount to a wall or ceiling only as
recommended by the manufacturer.
8. Ventilation. Site the appliance so that its location or position
does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa, rug, or
similar surface that may block the ventilation openings, or
placed in a built-in installation such as a bookcase or cabinet
that may impede the flow of air through the ventilation
openings.
9. Heat. Site the appliance away from heat sources such as
radiators, heaters, stoves, or other appliances (including
amplifiers) that produce heat.
10. Power sources. Connect the appliance to a power supply
only of the type described in the operating instructions or
marked on the appliance.
11.Grounding or polarisation. Do not defeat the safety purpose
of the polarised or grounding type plug. A polarised plug has
two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. When
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
12. Power cord protection. Route power cords so that they are
not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plugs,
power sockets, and at the point where they exit from the
appliance.
13. Protective attachment plug. As a safety feature the product is
equipped with an attachment plug containing overload
protection. See the instruction manual about resetting or
replacing the plug. Should the plug need replacing ensure
that a replacement is used which has the same overload
protection as the original.
14. Cleaning. Disconnect the unit from the power supply before cleaning.
Remove dust and fingerprints with a soft, dry cloth. Avoid using
domestic cleaning products on the unit.
15. Power lines. An outdoor antenna should be located away
from power lines.
