Lexicon mc 12 owners manual

Page 1

Lexicon, Inc. MC-12 Serial Communications Protocol Printed on: 11/07/01 © 2001 Lexicon, Inc. All rights reserved.2 of 49 Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby laboratories. Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm, Ltd. © Lucasfilm, Ltd. & TM. Surround EX is a jointly developed technology of THX and Dolby Laboratories, Inc. and is a trademark of Dolby Laboratories, Inc. All rights reserved. Used under authorization. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No. 5,451,942; 5,956,674; 5,974,380; 5,978,762 and other world-wide patents issued and pending. DTS, DTS- ES Extended Surround and Neo:6 are trademarks of Digital Theater Systems, Inc. © 1996, 2000 Digital Theater Systems, Inc. All rights reserved. LOGIC7 and the LOGIC7 symbol are registered trademarks of Lexicon, Inc., a Harman International Company. © 2001 Lexicon, Inc. All rights reserved. This document should not be construed as a commitment on the part of Lexicon, Inc. The information it contains is subject to change without notice. Lexicon, Inc. assumes no responsibility for errors that may appear within this document. Lexicon, Inc. 3 Oak Park Bedford, MA 01730-1441 USA Tel 781-280-0300 Fax 781-280-0490 www.lexicon.com Customer Support Tel 781-280-0300 Fax 781-280-0495 (Sales) Fax 781-280-0499 (Service)

Page 2

Lexicon, Inc. MC-12 Serial Communications Protocol Printed on: 11/07/01 © 2001 Lexicon, Inc. All rights reserved.3 of 49 1Documents5 2 Definitions5 2.1 Protocol Version Cross-reference 5 3 Abbreviations5 4 General Description 5 5 Physical Layer7 DB-9 RS232 Connector7 5.2 Serial Port Driver 7 5.3 Errors7 5.4 MC-12 Receive Buffer 7 5.5 MC-12 Hardware Verification (Not Supported in MC-12 V1.00, V1.01) 7 6 Data Link Layer8 6.1 Errors8 7 Application Layer9 7.1 MC-12 Asynchronous Notification Packets 9 7.1.1 Wakeup Notification (MC-12, MC-1) 9 7.1.2 Sleep Notification (MC-12, MC-1) 9 7.1.3 Front Panel Display (MC-12, MC-1) 9 7.1.4 MC-1 Parameter Change (MC-12, MC-1) 10 7.2 Acknowledgment Packets 11 7.2.1 Acknowledge (MC-12, MC-1) 12 7.2.2 No Acknowledge (MC-12, MC-1) 12 7.3 Host Initiated Command Packets 12 7.3.1 Reset Unit (MC-12, MC-1) 12 7.3.2 Restore (MC-12, MC-1) 13 7.3.3 MC-1 Send IR Command (MC-12, MC-1) 13 7.3.4 Get Unit Configuration (MC-12, MC-1) 14 7.3.5 Get System Status (MC-12, MC-1) 16 7.3.6 Get Zone 2 Status (MC-12, MC-1) 18 7.3.7 Get System Parameter Definition (MC-1) 19 7.3.8 Get System Parameter Values (MC-1) 19 7.3.9 Get Effect Definition by Id (MC-1) 19 7.3.10 Get Effect Parameter Definition (MC-1) 19 7.3.11 Get Effect Parameter Values (MC-1) 19 7.3.12 Get Custom Name (MC-12, MC-1) 19 7.3.13 Get Input Name by Id (MC-12, MC-1) 20 7.3.14 Get FPD Control Registers (MC-1) 20 7.3.15 Set System Parameter Values (MC-1) 20 7.3.16 Set Effect Parameter Values (MC-1) 21 7.3.17 Set Effect Name by Effect Id (MC-1) 21 7.3.18 Set System Volume (MC-12, MC-1) 21 7.3.19 Set Main Balance (MC-12, MC-1) 21 7.3.20 Set Front/Back Balance (MC-12, MC-1) 22 7.3.21 Set Active Effect by Id (MC-12, MC-1) 22 7.3.22 Set Record Input (MC-12, MC-1) 23 7.3.23 Clear Record Input (MC-12, MC-1) 24 7.3.24 Set Zone2 Volume (MC-12, MC-1) 24