Lexicon dc 1 owners manual

Page 2

DC-1 Dolby DigitalE/DTS® Quick Reference

Hrs/C-

SW6

l

("03/0/63

[-ffl- w- 0 -4UA. - Mai-Ml -W

6?) ©

@tfi

(Gifts/(3

lfnf (- Ftrf' t raf-

rm

W

- WWI
re (o-t

v C

l
robe

FEW fal-

- ff?! -"

Exclusive RECORD/ZONE 2 Control Mode

Iowas

RECORD/ZONE 2 Control
mode allows use of the
D01 in anotherroom while
the room in which the DC-1
is located remains muted.
To enter RECORD/ZONE
2 Control mode, turn on the
DC-1 by pressing the
RECORD/ZONE 2 key on
the remote.

Puts unlt Into standb

Input selection for
Record and Zone 2
outputs (a)

From DC- I standby

activates Zone 2 In ut
SystemMute and E ect
Bypass From normal
operatln mode press with

ACC to enter ZONE 2

Control Mo de

Adjust Zone 2
UR Balance

Pressing any key otherthan
the input selectors, MUTE,
VOLUME or BALANCE will
display the message:
ZONE 2 MODE ENABLED
KEV INVALID

To exit, press OFF.

' TAPE and vent are normally
BLOCKED"butcanbechangedinthe
Setup input Configuratlon menu.

y

Digital inputs can be se-

lectedforthe Record/Zone

2 outpus under the follow-

ing conditions:

- A digitial rnput must be as

signed to the input via the

Setup menu.

The input must have

Record/Zone 2 set to DlGlr

TAL.

- M W " "181 be selected
Juts.

Adusts ZONE 2

cu

i

put level

MJte slunmute s
20 no 2 outp ut 5

Press With ACCV to
deactivate Zone 2
Control and restore
normal operation

RECORD/ZONE 2 Control from the normal operating mode

onsmsn .
otsnlay OFF

Bass must

clear Asstgned Errsct'

Asstgnahle
Ettems (a)

Activate Zone 2 Control ,
Aztlvate "Vou Are Here
modE, access Lock in
LOCK SETTlNGS menu

> .

-ng Volume Step t

Hold down to acmss
human lunctlnns.

'To clear an assigned effect, wnlle holding down ACCY, press BYPASS, then

press the associated input button.

Onsmesn
Display on

Treble Autust

Tllt must (Dolby Dtglal verslon)

Toggles oso blue background
on and cm

Tllt Agust (Dolby otgttel version)
Remote Trigger on

sedE Volume Step
HemmeTnggelOFF

Press and hold ACCY while pressing DONE to activate a

"You Are Here" mode which:

- Disables mute

. Sets Main and Zone 2volume
to rSOdB

- Centers Balance controls

- Loads the Pro Logic Effect

Selects the VCRt input
Activates Oancreen display
with 2 second timeout

Sets Remote Trigger ON
Setsall tone controls to 0013 or
OFF

Input Effect Assignments

In normal operation, press-
ing RECORD/ZONE 2 as-
signs (or de-assigns) the
current input selection to
the Record/Zone 2 outputs
without affecting the Main
outputs.

Holding down RECOR D/
ZONE 2 allows Volume and
Mute adiustments to affect
onlythe Record/Zone2 out-
puts.

To access remote control
Zone2 functions, press and
hold ACCY, then press
RECORD/ZONE 2. To re-
store remote control of the
main outputs, press and
hold ACCY, then press
SELECT.

Note any Effects you have
assigned to the remote con-
trol input keys.

Lexicon, Inc. 3 Oak Park - Bedford MA 01730-1441 USA - Tel: (781) 280-0300 0 Fax: (781) 280-0490