Page 1
VOL
VOL CH
CH
MUTE
MENU HOME
00:25
HOME
VCR
SAT
CD/SACD
DVD
PRE AMPTV
PRE PRO
AUX
CUST.PGE INT AMP
SMART
then connect to the socket (9) It
takes approximately 17 hours to fullycharge the batteries.
Notes
1. The battery level meter does not
show when the remote control isin the menu mode.
2. The remote control is designed
for optimum operation using theoriginal batteries shipped with theunit.
3. Do not connect the power
adapter and connector when
using non original batteries.
4. To avoid data loss, remote setup
is prohibited when the batteriesare weak.
Standard Functions
- Preprogrammed learning
-10 in 1 remote (replaces
TV, VCR,
SAT, CTV ,DVD, LD, CD, AV1, AV2
and AV 3 )
-Learns up to 240 commands
- A maximum of 70 keys per device
mode
-EL backlit touch screen panel with
intelligent light sensor power save
- 5 hard keys for direct access
(power on/off
, CH+, CH, VOL+, and
VOL
)
- 3 touch screen hot keys (
MENU,
HOME,
and MUTE )
- Set up by code name, device
brand name search, and librarycode search
- 10 SMART programs, each with a
maximum of 32 steps*
- Device name and function keys
that edit, move, delete, andrestore*
- Custom page for personal setup
and frequently used commands*
- Remote to remote copy*
1 Infra red lens
2 LED indicator3Battery level meter
4Current time
5 Current mode
6 Touch screen panel7Hot keys
8 Hard keys
9Connection socket
10 Battery compartment
(on the back)
Standard Functions, continued
- Volume punch through control for
TV and AMP *
- Interactive help screen
- Security password lock
Optional Functions
- Docking charger for quick
battery charging *
- Computer link (PC link) for
special key layout and function
via USB connection to a PCcomputer *
- PC software upload and
download *
*For information on all items marked with
an asterisk, please download the ownersreference for the universal remote, on theKrell website.
2 Universal Krell Remote Krell ®is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell Industries, Inc., its sub
sidiaries, and authorized agents. All rights reserved. All other trademarks and trade names are registered to theirrespective companies.
© 2004 by Krell Industries, Inc., All rights reserved
1
2
3
4
5
6
7
8
9 10
Remote Overview
Press to detachRemove the rubber
protector EMPTY BATTERY
LEVEL
METERFULL
Figure 1 Krell Universal Touch
Screen Remote, Front Panel
Battery Changing
and Charging
Charge the batteries 10 hours before
using the remote control for the firsttime. Recharge the batteries when
the battery level meter (3) is empty,
indicating weak batteries.
To install the batteries, open the bat
tery cover and follow the polaritysymbols on the battery compartment.
Place the provided 4 AAA NiMHrechargeable batteries inside, then
replace the cover.
To recharge the batteries, plug the
power adapter into the AC wall outlet,
insert the DC jack into the connector,
Page 2
Interactive Help Screen
Press the question mark, located at
the top right of every menu screen,
and follow the directions on the dis
play.
Hot Keys
There are 3 hot keys on the bottom
of the LCD display:
HOME Jump to the main page for
the device mode selection, forexample TV, VCR, DVD, etc.
MENU Jump to the main page of
the setup menu to access
and configure settings
MUTEVolume mute function
Hard Keys
Five hard keys transmit the IR com
mands for the selected device.
Power on or off
CH+ Program or channel up
CH -“ Program or channel down
VOL+ Volume up
VOL Volume down
Key Tone
Press any key, and a short beep
sound occurs.
To disable this
function
, see Remote Setting, on
page 7.
Backlit Screen
The LCD touch screen and hard keys
are illuminated by an ELpanel. The
panel stays active for approximately
5 seconds (the factory default) aftera key is pressed.
To change the
auto turn off time or to disable this
function
, see Remote Setting, on
page 7.
IR Code Library
The IR Code Library contains a list
of devices which have codes pro grammed into the Universal KrellTouch Screen Remote.
For information on how to access
and select a programmed code, see
Main Menu Setup Functions, on
page 5.
Home
After inserting the batteries, press
the touch screen. The remote con trol prompts at the home page,showing all devices, as well as keysfor setting up custom pages and
SMART keys. Press the
HOME hot
key at any time to return to thehome page.
Sleep Mode
If the remote is inactive for approxi
mately 10 seconds, the screenreverts to the power save (sleep)
mode and shuts down the display.
Press the screen panel to reactivate
the unit.
Note
When in the sleep mode, the hard
key section of the remote is stillavailable for commands.
Access a Device Mode
Press any device key on the HOME
screen to access the corresponding
device mode. The device main page
appears, showing the remote control
keys for the device.
Page
Press the PAGE key at the bottom of
the device mode screen to changecommand pages for the device.
Send a Command
Point the remote infrared lens (1) at
the IR sensor on the device to whichyou want to send a command. Press
a key to send out the corresponding
infrared command.
Empty Key
There is no label or symbol on an
empty key, and the key is availablefor learning.
Menu
Press the MENU hot key to access
the main menu page, and configurethe remote settings.
For more infor
mation
, see Remote Setting, on
page 7.
Getting Started
This section explains basic remote
navigation, the difference betweenhot keys (7) and hard keys (8), andintroduces the backlit screens and
IR code library.
IMPORTANT
You must calibrate the touch
screen panel (6) before configur ing the remote.
Panel Calibration
Calibrate the remote touch screen
panel initially to teach the keys to
respond to your touch. The keys
shift their optimum pressure point
slightly during calibration to adjust to
the pressure of your finger tips. Thisallows you to press and send a keycommand on even the smallest keyswith ease.
In addition, perform this calibration
after you have received an incorrectresponse from the touch screenpanel.
1. Press
MENU
2. Press REMOTE SETTING
3.Press CALIBRATION
4. Follow the on screen instructions.
5. Press
BACK to return to the home
page
Reset Button
If your remote control has stopped
for any reason, you can reset it bypressing the reset button inside thebattery compartment.
Universal Krell Remote3