Page 1
About Copyright
All copyrights and other intellectual property rights for this technical document and relevant in-depth manuals as well as
the software described in this technical document, relevant in-depth manuals, and help texts and manuals attached to the
software are owned by Kenwood Corporation.
A right to use the software described in this technical document and relevant in-depth manuals is granted to a licensee by
Kenwood Corporation; however, the title to and ownership of the software shall be owned by Kenwood Corporation. Refer
to the help texts attached to this software for details.
Kenwood Corporation does not warrant quality and performance of the software described in this technical document and
relevant in-depth manuals to conform to the applicability of any use, and Kenwood Corporation shall be free from liability
for any defects, damage or loss, or from any warranty to anything other than expressly described in this technical
document and relevant in-depth manuals.
Revision history
Date Description
July 1, 2005 Revised 20-pin connector Table.
Page 2
MOD (K)/Ver. 1.01 Confidential I
CONTENTS
1 TERMINAL FUNCTIONS............................ 1
1.1 20-pin Connector............................................... 1
1.2 Solder Pad Connection ..................................... 2
2 CONNECTING THIRD PARTY OPTIONAL
DEVICES .................................................... 3
2.1 Voice Scrambler Board (SC20-460).................. 3
2.1.1 Configuring and Modifying the
SC20-460 Board.............................................. 3
2.1.2 Installing the SmarTrunk Board in the
Transceiver...................................................... 4
2.1.3 Configuration Using KPG-101D ...................... 5
2.2 Voice Scrambler Board (KW21) ........................ 6
2.2.1 Installing the KW21 Board in the
Transceiver...................................................... 6
2.2.2 Configuration Using KPG-101D ...................... 7
2.3 ANI Board.......................................................... 7
2.3.1 Configuring and Modifying the QE-2 Board..... 7
2.3.2 Installing the QE-2 Board in the
Transceiver...................................................... 9
2.3.3 Configuration Using KPG-101D .................... 10
2.4 Connecting the Man-down Tilt Switch for
Emergency Use............................................... 11
2.4.1 Configuring and Modifying the
Man-down Tilt Switch .................................... 11
2.4.2 Installing the Man-down Tilt Switch in the
Transceiver.................................................... 11
2.4.3 Configuration Using KPG-101D .................... 12
2.5 Using CAE-3 with Another Optional Board ..... 13
2.5.1 CAE-3 and Scrambler Board (SC20-460) ..... 13
2.5.2 Using CAE-3 with
Scrambler Board (KW21) .............................. 14
2.5.3 CAE-3 and QE-2 ........................................... 14
