Jbl L 200A Technical Manual

Page 1

Technical Manual

L200/L200A
Studio Master

RED NYYN i

C 2.4mH * 0

48259
INPUT 1335ng :: LF

2

C BLK o

SWITCH
48249
SEE "SYSTEM NOTES"
1.2mH

3;? § 45253 (16) 3

48260 .7 H -°

0 LAB 51239 XWA)
_2
2': (LX16) HF
SEE "SYSTEM NOTES" 50:24
10206l(LX16-A)
I
~ 43 4
LX16 (L200)/LX16~A (L200A) SCHEMATIC

SYSTEM COMPONENTS: HIGH FREQUENCY DRIVER (Contd)

LOW FREQUENCY DRIVER: LE158 Gap GaUQe: .031 "
Cone Kit: CBRLEisB "095: . .
Nom. impedance: 8 Ohm If Not SerVIceable, Replace With: 2425J
Dynamic Test Input V: B V'sua' Change: _ Yes
Sweep Frequency Hz: 204 200 Battle Modification: No
D.C. Resistance Ohms: 31 min/319 max Exact Acoustic Replacement: Not Slightly different.
Gap Gauge: 057., .Fteplace both units in a stereo pair.
Notes: Additional Parts Currently Available':
If Not Serviceable, Replace With: 2234H Horn. 23;2323 L91 No Longer
Visua' Charge; Yes SYSTEM SPECIFICATIONS:
Battle Modification: No Nom. Impedance: 8 Ohm
Exact Acoustic Replacement: No. Use as last resort. Power Capacity: 100 Watts Continuous
Replace both units In a stereo pair. Program
Additional Parts Currently Available': Crossover Frequency: 1200 Hz
D°'e: 215 Sensitivity: sous (1 Watt @ 15 Feet)
M°"9 Gasm 34499 Enclosure Dim: 32-3/4" x 237/3" x 214/4" D
Trim Gasket: 21058 830m x 61 cm x 54cm
HlGH FREQUENCY DRIVER: LE65 Shipping Weight: 125 lbs. - 57 kg.
Diaphragm Kit: D16R2421 Additional Parts Currently Available:
Nom. impedance: 16 Ohm Grill: GZOO-Cloth
Dynamic Test Input V: 3.5
Sweep Frequency Hz: 550-1200 SYSTEM NOTES:
D.C. Resistance Ohms: 53 min .0 max It is suggested that the LX16 crossover be converted to LX16~A

configuration to provide additional high frequency driver pro-
tection when used in the L200 System.

'Other parts may also be available. Check with JBL for details.

JBL Consumer Products. Inc., 80 Crossways Park West, Woodbury, New York 11797 3/92 REV A