Page 1
-“
2-“ EN2C01
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to
possible eye injury.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
AVOID EXPOSURE TO BEAM.
LOCATION:
* PRINTED ON THE BACK * INSIDE, TOP OF THE MECHANISM
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
dangerous voltage within the products
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructions in the literature accom-
panying the appliance.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SER-
VICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION - VISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCK DEFEATED.
AVOID EXPOSURE TO BEAM.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
Before Switching on make sure that the voltage of your
electricity supply is the same as that indicated on the rating
plate.
Mains Cord
This appliance may be fitted with a non-rewireable plug. If
it is necessary to change the fuse in a non-rewireable plug
the fuse cover must be refitted. If the fuse cover is lost or
damaged, the plug must not be used until a replacement
available from the appliance manufacturer is obtained.
It is important that the colour of the replacement fuse cover
corresponds with the rating marking on the base of the
plug.
If the plug has to be changed because it is not suitable for
your socket, or becomes damaged, it should be cut off and
an appropriate plug fitted following the wiring instructions
below. The plug removed must be disposed of safely as
insertion into a 13A socket is likely to cause an electrical
hazard. For your own safety read the following instructions
carefully before attempting to connect this unit to mains.
The wires in this mains lead are coloured in accordance
with the following code:
BLUE=NEUTRAL, BROWN=LIVEImportant
As the colours of the wires in the mains lead of this appli-
ance may not correspond with the coloured markings iden-
tifying the terminals in your plug, proceed as follows:-
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or coloured
red.
No connection is to be made to the earth terminal of the
plug.
If a 13 Amp (BS 1363) Plug is used, a 3 Amp Fuse must be
fitted, of if any other type of Plug is used a 3 or 5 Amp
Fuse must be fitted, either in the Plug or Adaptor, or on the
Distribution Board.
Mains Supply: 220 - 240 V
˜50 Hz - AC only
Do not make any connection to
the larger pin marked with the
letter E or by the symbol
or coloured green or green and
yellow.
CONNECTION TO POWER (For the area of Great Britain)
FUSE
BROWN
(Live)
CORD GRIP
OUTER SHEATH OF THE WIRE
BLUE
(Neutral)
E5612/13BD(EN) 02.5.9 0:15 PM Page 2
Page 2
-“
3-“ EN2C01
PRECAUTIONS
IMPORTANT
Use only discs marked DVD or disc with this
DVD player.
POWER SUPPLY
The main power supply is engaged when the main
plug is plugged in a 220-240V
˜50Hz AC outlet.
To operate the unit, press the STANDBY button
to turn on the unit.
WARNING
To avoid fire or electric shock, do not expose
this unit to rain or moisture.
DEW WARNING
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm
place, or after heating a cold room or under con-
ditions of high humidity. Do not use the DVD
Player at least for 2 hours until its inside is dry.
WARNING:
LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
CAUTION
1) Do not attempt to open the cabinet. There are
no parts you can service inside. Refer all ser-
vicing to qualified service personnel.
2) Slot and openings in the cabinet and at the side
or bottom are provided for ventilation. To
ensure reliable operation and to protect the unit
from overheating these opening must not be
blocked or covered. Avoid enclosed spaces
such as book cases unless proper ventilation is
provided.
3) Keep the unit away from the radiator heat
sources.
4) Avoid using near strong magnetic fields.
5) Do not push objects of any kind into this
through the cabinet slot as they could touch
current carrying parts or short circuit parts
resulting in a fire or electric shock.
6) Never spill liquid of any kind on this unit.
If liquid is spilled into the unit, consult quali-
fied service engineer.
7) Use this unit in a horizontal (flat) position
only.
8) This equipment is in Stand-by mode when it
turns off whilst the power cord is connected.
DECLARATION OF
CONFORMITY
This product complies with the requirement of
the directives
EMC-Directive: 89 / 336 / EEC
Low Voltage Directive: 73 / 23 / EEC
CE Marking: 93 / 68 / EEC
declare that the DVD player
DV-P325E/DV-P325E(UK)
are in compliance with following norms:
EN 55013:1990
+A12:1994+A13:1996+A14:1999
EN 55020:1994
+A11:1996+A12:1999+A13:1999+A14:1999
EN 61000-3-2/ 1995+A1:1998+A2:1998
EN 61000-3-2/ A14:2000
EN 61000-3-3/ 1995
EN 60065:1998
EN 60825-1:1994
E5612/13BD(EN) 02.5.9 0:15 PM Page 3
