Page 2
26
1 Button, to unlock the remova-
ble control panel (release panel)
2BAND button (Band), to switch
to radio mode,
to select the FM memory levels
and the MW and LW frequency
ranges (MW and LW are not
available on the Freiburg C31
and Las Vegas DJ31)
TS, to start the Travelstore func-
tion
FMT button (Freiburg C31 and
Las Vegas DJ31), to select the
FM memory levels,
to switch to radio mode,
to start the Travelstore function.
3RDS button, to switch the RDS
function on/off (Radio Data Sys-
tem).
To display scrolling text.
4SCAN button, to start the scan
function.
5Cassette eject
6Cassette compartment
7
button, to switch the tape
side
8X-BASS button, to activate the
X-Bass function.
OPERATING ELEMENTS
9CD-C button, to select radio,
cassette, CD changer (if con-
nected) and AUX sources
:AUDIO button, to adjust the
bass, treble, balance and fader
settings.
;Arrow buttons
Page 18
42
Fast searching ( audible)
To fast search backwards or forwards,
-ž® keep one of the buttons ;
pressed until fast reversing / for-
warding begins.
Repeat ing individual t racks or
whole CDs ( REPEAT)
If you wish to repeat the current track,
-ž® briefly press button 3 (RPT) =.
RPT TRCK appears briefly and RPT
lights up in the display.
If you wish to repeat the current CD,
-ž® press button 3 (RPT) = again.
RPT DISC appears briefly and RPT
lights up in the display.
Cancelling the repeat function
If you want to stop the repeat function
for the current track or CD,
-ž® press button 3 (RPT) = until RPT
OFF appears briefly in the display
and RPT disappears.
Random play ( MIX)
To play the tracks on the current CD in
random order,
-ž® briefly press button 4 (MIX) =.
MIX CD appears briefly and MIX lights
up in the display.
To play the tracks on all the inserted CDs
in random order,
-ž® press button 4 (MIX) = again.
MIX ALL appears briefly and MIX lights
up in the display.Note:
In the case of the CDC A 08 and
the IDC A 09, all the CDs in the
changer are selected randomly. In
the case of any other changer, all
the tracks on one CD are played
randomly before the next CD in the
changer is played.
Stopping MIX
-ž® Press button 4 (MIX) = until MIX
OFF appears briefly in the display
and MIX disappears.
Scanning all t racks on all CDs
(SCAN )
To briefly play all the tracks on all the
inserted CDs in ascending order,
-ž® press the SCAN button 4.
SCAN appears in the display.
Stopping SCAN
-ž® To stop scanning, press the SCAN
button 4 again.
The current track will then continue to
be played.
Note:
You can set the scantime. For fur-
ther details, please read the sec-
tion entitled Setting scantime in
the Radio mode chapter.
CD CHANGER MODE
