This is the 12 pages manual for audionet amp 2 max owners manual. Read or download the pdf for free.
If you want to contribute, please mail your pdfs to info@audioservicemanuals.com.
Page: 1 / 12
Extracted text from audionet amp 2 max owners manual (Ocr-read)
Page 2
3 Setting up your system
Your Audionet AMP II MAX have the perfect dimensions to be placed
near your speakers. But put side by side both AMP II MAX are 43 cm in
width (standard width).
Do not cover the top to prevent the amplifiers from overheating!
Please connect the power jack at the rear to your wall outlet using the
provided Audionet Power Cord (APC).
The voltage specified at the rear of your AMP II MAX must match your
mains specifications. The AMP II MAX is a Class I unit and has to be
earthed.
The correct polarization of mains is important for reasons of audio clarity
and stability. Please make sure that the pin labled "Phase" at your APC is
connected to the "hot" pin of your wall outlet. The Audionet AMP II
MAX indicates a wrong polarization of the mains lead. If you read: At-
tention: Mains Phase incorrect when powering up, switch
off the AMP II MAX and flip the plug in your wall outlet. Placing
Power connections
Mains phase recognition
