Arcam AV9 Owners Manual

This is the 50 pages manual for Arcam AV9 Owners Manual.
Read or download the pdf for free. If you want to contribute, please mail your pdfs to info@audioservicemanuals.com.

Page: 1 / 50
left right
Arcam AV9 Owners Manual

Extracted text from Arcam AV9 Owners Manual (Ocr-read)


Page 1

ARCIAM F M J

AV9 Pre-amp. processor

Préamplificateur-processeur AV9
Vorverstcirker/Prozessor AV9
AV9 Voorversterker Processor

Page 2

Safety guidelines

AV9

A
A

of electric shock to persons.

The lightning flash with an arrowhead symbol within an equilateral triangle, Is Intended to alert the user to the presence
of unlnsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk

The exclamation point within an equilateral triangle Is Intended to alert the user to the presence of Important operating
and maintenance (servicing) Instructions In the literature accompanying the product.

This product Is designed and manufactured to meet strict
quality and safety standards. However, you should be aware
of the following Installation and operation precautions:

You should read all the safety and operating Instructions
before operating thls appliance. Retain this handbook for
future reference and adhere to all warnings In the handbook
or on the appliance.

The presence of electricity near water can be dangerous. Do
not use the appliance near water - for example next to a
bathtub, washbowl, kitchen sink, In a wet basement or near
a swimming pool, etc.

Take care that objects do not fall and liquids are not
spilled Into the enclosure through any openings. Liquid
filled objects such as Vases should not be placed on the
equipment.

Do not place the equipment on a bed, sofa, rug or similar
soft surface, or In an enclosed bookcase or cabinet, since
ventilation may be lmpeded. We recommend a minimum
distance of 50mm (2 Inches) around the sides and top of the
appliance to provide adequate ventilation.

Locate the appliance away from naked flames or heat
producing equipment such as radiators, stoves or other
appliances (Including other amplifiers) that produce heat.

The appliance has been designed for use In moderate
climates.

Only use a rack or stand that Is recommended for use with
audio equipment. If the equipment Is on a portable rack It
should be moved with great care, to avoid overturning the
combination.

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a soft,
damp, lint-free cloth. Do not use paint thinners or other
chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays or
polishes as they can cause lndellble white marks If the unit
ls subsequently wiped with a damp cloth.

Only connect the appliance to a power supply of the type
described In the operating Instructions or as marked on the
appliance.

Power supply cords should be routed so that they are not
likely to be walked on or pinched by Items placed upon or
against them, paying particular attention to cords and plugs,
and the point where they exit from the appliance.

This Is a class 1 product and requires an earth connection.

Ensure that the grounding means of the appliance Is not
defeated.

Locate any outdoor antenna/aerial away from power lines.

If the unit has a stand-by function, a small amount of
current will continue to flow Into the equipment In this
mode. Unplug the power cord of the appliance from the
outlet If left unused for a long period of time.

If an abnormal smell or smoke ls detected from the
appliance, turn the power off Immediately and unplug the
unit from the wall outlet. Contact your dealer Immediately.

You should not attempt to service the appliance beyond that
described In this handbook. All other servicing should be
referred to qualified service personnel.

The appliance should be serviced by qualified service
personnel when:

A. the power-supply cord or the plug has been damaged,
or

B. objects have fallen, or liquid has spllled Into the
appliance, or

C. the appliance has been exposed to rain, or

D. the appliance does not appear to operate normally or
exhibits a marked change In performance, or

E. the appliance has been dropped or the enclosure
damaged.

This product has been designed to meet the IEC 60065
International electrical safety standard.