Ampeg bse 410h hs hlf

Page 1

BSE410H Series Bass Cabinets Ampeg BSE410H Series 4x10 Bass Cabinets are quality two-way speaker cabinets suitable for all venue sizes. The cabinets feature heavy duty recessed handles, remove- able casters, and a heavy gauge steel grill for maximum speaker protection. The jackplate features two 1/4 jacks wired in parallel, allowing easy daisy chaining from one speaker to another. Each of the jacks may be used as an input or a through connection. The three position HF Horn switch allows for: - Full high frequency output (0 setting) - -6dB reduction of the high frequencies though the horn (-6 setting) - Horn shutoff (off setting) IMPORTANT SAFETY INSTRUCTIONS: 1.Read, follow and keep these instructions. Heed all warnings. 2.This speaker is capable of producing high sound pressure levels that may cause permanent hearing damage. User caution is advised and ear protection is recom- mended during use. 3.This speaker is designed for use on a level floor or mounted to a properly rated speaker stand with the supplied stand mount adapter. The use of a speaker stand poses a risk of personnal injury. Installations should be performed by a profes- sional installer in accordance with local building codes. 4.Speaker cables are a tripping hazard and must be routed out of traffic areas and away from any possible accidental contact. 5.Do not expose this speaker to rain or moisture. Do not place liquid filled contain- ers on this speaker. Clean only with a damp cloth. 6.Repair or service of this speaker should be performed only by qualified personnel.

Page 2

1: 1/4 Input / Output Jacks 2: High Frequency Horn Level Switch The BSE410H Series Jackplate: HIGH FREQUENCY ATTENUATOR FULL RANGE INPUTS OFF -“ 60 POWER HANDLING 400 WATTS RMS IMPEDANCE 8 OHMS MADE IN THE U.S.A. BY SLM ELECTRONICS 1400 FERGUSON AVE. ST. LOUIS, MO 63133 MODEL BSE410HS 47-928-66 (Place Serial Number label here) 7 43565 15531 9 BSE410HS (21) SERIAL# BMCDN20083 Line: Freq: Pwr: 1 2 BSE410H Series Bass Cabinets