Page 1
2
Introduction
Congratulations on Your Purchase!
Your new high fidelity receiver is designed to deliver maximum
enjoyment and years of trouble free service. Please take a
few moments to read this manual thoroughly. It will explain
the features and operation of your unit and help ensure a
trouble free installation. Please unpack your unit
carefully. We recommend that you save the carton and
packing material. They will be helpful if you ever need to
move your unit and may be required if you ever need to
return it for service. Your unit
is designed to be placed in a horizontal position and it is
important to allow at least two inches of space behind your unit
for adequate ventilation and cabling convenience. To avoid
damage, never place the unit near radiators, in front of
heating vents, in direct sunlight, or in excessively humid or
dusty locations. Connect your complementary components as
illustrated in the following section.
This symbol is intended to alert the user to the
presence of uninsulated "dangerous voltage"
within the product's enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
Caution : Do not block ventilation openings or stack
other equipment on the top.
FOR U.S.A.
Page 2
3
READ THIS BEFORE O PERATING YOUR UNIT
AC VOLTAGE SELECTION ............................ 115 V/230 V
This unit operates on 115-230 V AC. The AC voltage
selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped.
Before connecting the power cord to your AC
outlet, make sure that the setting position of
this switch matches your line voltage. If not, it
must be set to your voltage in accordance with
the following direction.
AC voltage selector switch
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.AC 230 V AC 1 15 V
