Alto control 60 user manual

Page 1

7. WARRANTY 1. WARRANTY REGISTRATION CARD To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manufacturer a better understanding of the sales status, so as to purport a more effective and efficient after-sales warranty service. Please fill out all the information carefully and genuinely, miswriting or absence of this card will void your warranty service. 2. RETURN NOTICE 2.1 In case of return for any warranty service, please make sure that the product is well packed in its original shipping carton, and it can protect your unit from any other extra damage. 2.2 Please provide a copy of your sales receipt or other proof of purchase with the returned machine, and give detail information about your return address and contact telephone number. 2.3 A brief description of the defect will be appreciated. 2.4 Please prepay all the costs involved in the return shipping, handling and insurance. 3. TERMS AND CONDITIONS 3.1 warrants that this product will be free from any defects in materials and/or workmanship for a period LT O of 1 year from the purchase date if you have completed the Warranty Registration Card in time. 3.3 During the warranty service, may repair or replace this product at its own option at no charge to you for LT O parts or for labor in accordance with the right side of this limited warranty. 3.4 This warranty does not apply to the damages to this product that occurred as the following conditions: Normal tear and wear. Instead of operating in accordance with the user's manual thoroughly, any abuse or misuse of this product. The product has been altered or modified in any way. Damage which may have been caused either directly or indirectly by another product / force / etc. Abnormal service or repairing by anyone other than the qualified personnel or technician. And in such cases, all the expenses will be charged to the buyer. 3.5 In no event shall be liable for any incidental or consequential damages. Some states do not allow the exclu- LT O sion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. 3.6 This warranty gives you the specific rights, and these rights are compatible with the state laws, you may also have other statutory rights that may vary from state to state. 3.2 The warranty service is only available to the original consumer, who purchased this product directly from the retail dealer, and it can not be transferred. 16 SAFETY RELATED SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol, wherever used, alerts you to the pre- sence of un-insulated and dangerous voltages with- in the product enclosure. These are voltages that may be sufficient to constitute the risk of electric shock or death. Protective Ground Terminal AC mains (Alternating Current) Hazardous Live Terminal ON:Denotes the product is turned on. This symbol, wherever used, alerts you to impo- rtant operating and maintenance instructions. Please read. OFF:Denotes the product is turned off. WARNING Describes precautions that should be observed to prevent the possibility of death or injury to the user. CAUTION Describes precautions that should be observed to prevent damage to the product. Protective Ground Operating Conditions IMPORTANT SAFETY INSTRUCTIONS Cleaning Servicing Power Cord and Plug the recommended fuse type as indicated in this manual. Do not short-circuit the fuse holder. Before replacing the fuse, make sure that the product is OFF and disconnected from the AC outlet. Before turning the product ON, make sure that it is connected to Ground. This is to prevent the risk of electric shock. Never cut internal or external Ground wires. Likewise, never remove Ground wiring from the Protective Ground Terminal. Always install in accordance with the manufacturer's instructions. To avoid the risk of electric shock and damage, do not subject this product to any liquid/rain or moisture. Do not use this product when in close proximity to water. Do not install this product near any direct heat source. Do not block areas of ventilation. Failure to do so could result in fire. Keep product away from naked flames. Read these instructions Follow all instructions Keep these instructions. Do not discard. Heed all warnings. Only use attachments/accessories specified by the manufacturer. Do not tamper with the power cord or plug. These are designed for your safety. Do not remove Ground connections! If the plug does not fit your AC outlet seek advice from a qualified electrician. Protect the power cord and plug from any physical stress to avoid risk of electric shock. Do not place heavy objects on the power cord. This could cause electric shock or fire. When required, either blow off dust from the product or use a dry cloth. Do not use any solvents such as Benzol or Alcohol. For safety, keep product clean and free from dust. Refer all servicing to qualified service personnel only. Do not perform any servicing other than those instruc- tions contained within the User's Manual. Fuse To prevent fire and damage to the product, use only No user serviceable parts inside. Power Supply Ensure that the mains source voltage (AC outlet) matches the voltage rating of the product. Failure to do so could result in damage to the product and possibly the user. Unplug the product before electrical storms occur and when unused for long periods of time to reduce the risk of electric shock or fire. External Connection Always use proper ready-made insulated mains cabling (power cord). Failure to do so could result in shock/death or fire. If in doubt, seek advice from a registered electrician. Do Not Remove Any Covers Within the product are areas where high voltages may present. To reduce the risk of electric shock do not remove any covers unless the AC mains power cord is removed. Covers should be removed by qualified service personnel only. WARNING 1 Disposing of this product should not be placed in municipal waste and should be Separate collection.

Page 2

Band Pass FiltersHigh pass Butterworth Low pass Butterworth Freq Freq20Hz 20KHz step 1/12 oct Slope Slope AUX SectionDelay lineUp to 512 ms min step 21us Digital input gain /+12dB step 0.5dB Digital output volume /+12dB step 0.5dB Analog Input SectionInputs 2 XLR F electronically balanced Input Impedance >40 Kohms Max. Input Level 2 XLR M electronically balanced <200 Ohms +12dBv 20Hz 20KHz >99 dB 0.01 1KHz 3 dBFS Sampling Frequency Conversion Input 20 bits Sigma-Delta ConversionOutput 24 bits Sigma-Delta Analog Output Section Outputs Output Impedance Max. Output Level Digital/Analog InterfaceAmplitude Response Signal to Noise Ratio THD+N 46.875 KHz +12dBv MemoryFactory preset36 (6 for each EQ type) User preset63 MIDI SectionConnectionsInput/output/thru Sockets5 poles DIN(female) mode Photocoupled Power Supply Connector type 3 pole IEC, grounded TypeServo controlled, switching AC Input 95 240V~60 50Hz Rated power consumption 15W fuse 210 240V: T250mAL 250VAC 95 120V: 500mAL 250VAC User InterfaceGraphic Display 128 64 dot Keyboard 14 user keys/8 LEDs Vu meter 2 6 LEDs Physical Size Standard 19"rack mounting Dimensions 483(W) 232.5(D) 44(H)mm(19" 9.3" 1.7") weight 3.5Kg(7.72lb) 6.TECHNICAL SPECIFICATIONS Parametric Filters Gain /+15dB step 0.5dB Freq 20Hz 20KHz step 1/12 oct Bandwidth0.05oct 3oct step 0.05oct Bypass, 1 ord ( 6dB/oct), 2 ord ( 12dB/oct) stnd 20Hz 20KHz Step 1/12 oct Bypass, 1 ord ( 6dB/oct), 2 ord ( 12dB/oct st nd 15 Dear Customer: PREFACE Thanks for choosing LTO CONTROL60 and thanks for choosing one of the results of LTO AUDIO TEAM job and researches. For our LTO AUDIO TEAM, music and sound are more than a job...are first of all passion and let us say our obsession! We have been designing professional audio products for a long time in cooperation with some of the major brands in the world in the audio field. The LTO line presents unparalleled analogue and digital products made by Musicians for Musicians in our R&D centers in Italy, Netherlands, United Kingdom and Taiwan. The core of our digital audio products is a sophisticated DSP (Digital Sound Processor) and a large range of state of the art algorithms which have been developed by our Software Team for the last 7 years. Because we are convinced you are the most important member of LTO AUDIO TEAM and the one confirming the quality of our job, we would like to share with you our work and our dreams, paying attention to your suggestions and your comments. Following this idea we create our products and we will create the new ones! From our side, we guarantee you and we will guarantee you also in future the best quality, the best fruits of our continuous researches and the best prices. Our LTO CONTROL60 is the result of many hours of listening and tests involving common people, area experts, musicians and technicians. The result of this effort is a DSP hi-performance equalizer that can be used in applications as musical performances, installation and sound reinforcement. Besides we offer to you a number of factory EQ curves that we collected and transformed in presets now available in our small, efficient and easy to use LTO CONTROL60. Nothing else to add, but that we would like to thank all the people that made the LTO CONTROL60 a reality available to our customers, and thank our designers and all the LTO staff, people who make possible the realization of products containing our idea of music and sound and are ready to support you, our customers, in the best way, conscious that you are our best richness. Thank you very much LTO AUDIO TEAM 2