SAFETY RELATED SYMBOLS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol, wherever used, alerts you to the pre-
sence of un-insulated and dangerous voltages with-
in the product enclosure. These are voltages that
may be sufficient to constitute the risk of electric
shock or death.
Protective Ground Terminal
AC mains (Alternating Current)
Hazardous Live Terminal
ON:Denotes the product is turned on.
This symbol, wherever used, alerts you to impo-
rtant operating and maintenance instructions.
OFF:Denotes the product is turned off.
Describes precautions that should be observed to
prevent the possibility of death or injury to the user.
Describes precautions that should be observed to
prevent damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
Power Cord and Plug
the recommended fuse type as indicated in this
manual. Do not short-circuit the fuse holder. Before
replacing the fuse, make sure that the product is
OFF and disconnected from the AC outlet.
Before turning the product ON, make sure that it is
connected to Ground. This is to prevent the risk of
Never cut internal or external Ground wires. Likewise,
never remove Ground wiring from the Protective
Always install in accordance with the manufacturer's
To avoid the risk of electric shock and damage, do
not subject this product to any liquid/rain or moisture.
Do not use this product when in close proximity to
Do not install this product near any direct heat source.
Do not block areas of ventilation. Failure to do so
could result in fire.
Keep product away from naked flames.
Read these instructions
Follow all instructions
Keep these instructions. Do not discard.
Heed all warnings.
Only use attachments/accessories specified by the
Do not tamper with the power cord or plug. These are
designed for your safety.
Do not remove Ground connections!
If the plug does not fit your AC outlet seek advice from
a qualified electrician.
Protect the power cord and plug from any physical
stress to avoid risk of electric shock.
Do not place heavy objects on the power cord. This
could cause electric shock or fire.
When required, either blow off dust from the product
or use a dry cloth.
Do not use any solvents such as Benzol or Alcohol.
For safety, keep product clean and free from dust.
Refer all servicing to qualified service personnel only.
Do not perform any servicing other than those instruc-
tions contained within the User's Manual.
To prevent fire and damage to the product, use only
No user serviceable parts inside.
Ensure that the mains source voltage (AC outlet)
matches the voltage rating of the product. Failure
to do so could result in damage to the product and
possibly the user.
Unplug the product before electrical storms occur
and when unused for long periods of time to reduce
the risk of electric shock or fire.
Always use proper ready-made insulated mains
cabling (power cord). Failure to do so could result
in shock/death or fire. If in doubt, seek advice from
a registered electrician.
Do Not Remove Any Covers
Within the product are areas where high voltages
may present. To reduce the risk of electric shock do
not remove any covers unless the AC mains power
cord is removed.
Covers should be removed by qualified service
Disposing of this product should not be
placed in municipal waste and should be
Thank you for choosing the 8-channel stereo powered mixer with DSP, which is the result of LT O APM80.1500
our AUDIO TEAM's endeavours. LT O
For the LTO AUDIO TEAM, music and audio are more than a profession, it is a passion and an obsession!
We have, in fact, been designing professional audio products for a number of years in cooperation with many of the
The LTO line represents unparalleled analogue and digital products made by musician, for musicians. With our de-
sign centres in Italy, Netherlands, and United Kingdom we provide you with world-class designs, while our software
development teams continue to develop an impressive range of audio specific algorithms.
By purchasing our LTO products you become the most important member of our LTO AUDIO TEAM. We would
like to share with you our passion for what we design and invite you to make suggestions, which will aid us in develop-
ing future products for you. We guarantee you our commitment for quality, continual research and development, and
We would like to thank all the people who made the LTO possible, especially to our designers and APM80.1500
LTO staff. It is their passion for music and professional audio that has made it possible for us to offer you, our most
important team member, our continued support.
The LTO is extremely flexible, ultra-low noise 8-channel stereo powered mixer with DSP, which is APM80.1500
configured with six MIC/line and two stereo inputs channels, each of them is equipped with a variety of key features
including a 3-band equalizer, two aux sends and pan control etc. Besides, the miraculous DSP with 256 presets and
powerful digital power amplifier will meet your requirements. To deserve to be mentioned, the output power of LTO
is 2 750W. Seeing is believing, let's meet the LTO . APM80.1500 APM80.1500
world's major brands.
of course the best prices.
Thank you very much
LTO AUDIO TEAM