This is the 23 pages manual for allen heath icon series service manual. Read or download the pdf for free.
If you want to contribute, please mail your pdfs to info@audioservicemanuals.com.
Page: 1 / 23
Extracted text from allen heath icon series service manual (Ocr-read)
icon series 3 IntroductionThe information presented in this section of the manual is intended for competent technical personnel to
carry out service and product support for the icon series. We assume that the reader is familiar with
the related electronic theory and audio terminology, and is able to carry out basic servicing, fault-finding
and repair of digital audio equipment of this type. Service personnel should also be familiar with audio
systems, mains earthing and power requirements, as well as handling precautions.
For information on the installation, operation and application of the icon series please refer to
the User Guide.
Whilst we believe the information in this manual to be reliable we do not assume responsibility for
inaccuracies. We also reserve the right to make changes in the interest of further product development.
Service and Technical Support Under normal operating conditions the icon does not require user maintenance or internal calibration.
Any service work required should be carried out by qualified technical personnel only.
We are able to offer further product support through our world-wide distribution network. To help us
provide an efficient service please quote the unit serial number, the date and place of purchase in any
communication regarding this product.
SAFETY WARNING! Mains electricity is dangerous and can kill. Mains voltage is present within the console power supply unit. The internal power supply unit contains no serviceable components and must be replaced as a complete unit if a failure occurs. Do not remove the power supply cover with mains electricity connected. To ensure your safety, mains earth is connected to the chassis through the power lead. Do not remove this mains earth connection. To avoid the risk of fire, replace the mains fuse only with the correct value and type as indicated on the power supply unit. IMPORTANT STATIC ELECTRICITY PRECAUTIONS
Many of the components in the icon are extremely sensitive to static electricity. The following
procedures reduce the possibility of damaging components:
1) Before handling any components or touching anything inside the unit, discharge your
bodys static electric charge by touching a grounded (earthed) surface. Wear a grounding
wrist strap if one is available.
2) Do not remove parts from their antistatic containers or bags until you are ready to install
them. When removing circuit boards (PCBs) or ICs from a unit, immediately place them in
an antistatic bag.
3) When handling PCBs, hold them by their edges and avoid touching the circuitry.
4) Do not slide PCBs or ICs over any surface.
5) Avoid having plastic, vinyl and foam in your work area.
6) Limiting your movements during service work reduces static electricity.
Replace the battery with an Allen & Heath recommended part. Using a different battery, recharging or
disassembling the battery may present a danger due to fire or explosion.
Dispose of used batteries promptly according to the manufacturers instructions. Keep all batteries
away from children. WARNING: There is danger of explosion if the battery is incorrectly replaced.
