This is the 9 pages manual for Akai AMU 310 Owners Manual.
Read or download the pdf for free. If you want to contribute, please mail your pdfs to email@example.com.
erator 5 Manual
Power requirements for electrical equipment differ
from area to area.
Please ensure that your machine meets the power
requirements in your area.
If in doubt, consult a qualified electrician.
I20V, 60 Hz for USA and Canada
RISK OF ELECYRIC SHOCK
DO NOT OPEN
220V, 50Hz for Europe except UK CAUTION: TO REDUCE THE RISK OF ELEC-
240V, 50 Hz for UK and Australia TRIO SHOCK, DO NOT REMOVE
110V/220V/240V, 50/60 Hz internally swrtchable COVER (ON BACK).
for other countries. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING T0 QUALIFIED SERVICE
VOLTAGE CONVERSION PERSONNEL.
Do not attempt this conversion yourself.
Models for Canada, USA, Europe, UK and Australia
are not equipped with this facility.
Each machine is preset at the factory according to
destination, but some machines can be set to 110V,
220V or 240V as required. If your machines voltage
can be converted, refer the following voltage conver
sion to a qualified Service Repair Shop or profes-
sional service personnel.
1. Disconnect the power cord.
2. Loosen the holding screws and remove the top
3. Remove the Line Voltage Fuse and insert the re-
quired Line Voltage Fuse onto the proper Fuse
Holder, explicitly following the printed instruc-
I. Use only household AC power sources.
Never use DC power sources.
2. Touching the plug with wet hands risks dangerous elec-
> tric shocks.
W I: 115A F] Always pull out by the plug and never the cord.
. Make sure the power consumption to each audio com-
ponent does not exceed wattage specified.
Only connect other audio components.
. Only let a qualified professional repair or reassemble
the equipment. An unauthorized person may touch the
internal parts and receive a serious electric shock.
. Never allow a child to put anything, especially metal
into this equipment. A serious shock or malfunction
240v 1:: may occur.
If water is spilled on this equipment, disconnect and
call your dealer.
. Make sure the equipment is well ventilated and away
from direct sunlight.
8. Keep away from heat (stoves, etc.l to avoid damage to
the external surface and internal circuits.
9. Avoid spray-type insecticides which will damage the
equipment and may ignite suddenly.
10. To avoid damaging the finish never use alcohol, paint
thinner or other similar chemicals.
II. Always place the equipment on a flat and solid surface.
12. Please read this manual in its entirety and keep it
handy for further reference.
The lightning flash wrth arrowhead symbol super-
imposed acrossagraphical representation oi a per-
son. within an equilateral triangle, is intended to
alert the user of the presenceof uninsulated "dant
serous voltage within the product's encloure.
that may be of sufficient magnitude to constitute
a risk of electric shock to persons,
The exclamation point within an equilateral trian-
gle is intended to alert the user of the presence of
important operating and maintenance l servicing I
instructions in the literature accompanying the ap
Hl" 220V LGA F 2