This is the 11 pages manual for Aiwa AP 2200 Service Manual.
Read or download the pdf for free.
If you want to contribute, please mail your pdfs to info@audioservicemanuals.com.
DRIVE
STEREO TURNTABLE SYSTEM
DIRECT
MODEL Ap-EEDOH.EE,UK
AIWA®
(SERVICE MAN UAI.)
Set using ISO screws.
DATE OF ISSUE 26/10/1977
SPECIFICATIONS
Type: Direct drive stereo turntable system Maximum acceptable cartridge-headshell weight:
Circuitry: 2 le, 8 transistors, 14 diodes 21.5 9 (including head shell)
Power supply:
AP-2200 H,EE
AC110-120V/220-240V 50/60 Hz
CARTRIDGE (H,UK model only)
AP-2200UK Type: Moving Magnet
AC120V/240V 50/60 Hz Output: 3 mV (1 kHz)
Power Consumption: 6W Separation: 20 dB (33-1/3 r.p.m. 1 kHz)
Dimensions: 424W x 123H x 359D mm Stylus: 0.5 mill diamond
Weight: 6.9 kg Tracking pressure: 2 grams (1.7 - 2.3 grams aliOWab'G)
O Frequency response: 20 - 20,000 Hz
TURNTABLE Compliance: 15 x 10'°cm/dyne
Type: Direct drive type Loading capacitance: 100pF
Motor: 2-phase, 8-pole, slotless Load impedance: 50k ohms
Hall-effect motor
RPM: 33-1/3, 45 r.p.m. _
RPM range: 13% (33-1/3 r.p.m.)
Platter: Die-cast aluminum, 306 mm diameter
S/N ratio: 70 dB (DIN 8 curve) above 60 dB
(IEC 8 curve)
Wow/flutter: Less than 0.035% (WRMS)
TONEARM
Type: Static balanced
Overhang: 15 mm
Tracking error: +6.3°, +0.8°
Off-set angle: 21 .5° .
Stylus pressure range: 0 , 3g ' Specifications and design are subject to change Without
Acceptable cartridge weight: 3.5 -- 11 9
notice.
DISASSEMBLY INSTRUCTIONS
To Remove Main Gear
_ 3) Remove 2 setscrews and 1 nut.
| Remove mounting E-rmg
To Remove Bottom Cover
Remove 1O screws.
- - - I 4 w
I 2) Remove the syncrate shaft and mounting
nut.
.3
\ng-jhl .V .
1/ i 1 - ,1 Js -
V97}
1 .
Syncrate shai
\
! zr:
K - 7} 2': 41/7 , A
53" 2 \ V _ . . I .
(gear --d~» -.;_ 4x , :- - ,.
.4 ,a - . ,3 , 7.
" ' 9 "-"""
\ ,/ . .
o E v N -- 8 I F