Aiwa ADC EX106 Owners Manual

This is the 32 pages manual for Aiwa ADC EX106 Owners Manual.
Read or download the pdf for free. If you want to contribute, please mail your pdfs to

Page: 1 / 32
left right
Aiwa ADC EX106 Owners Manual

Extracted text from Aiwa ADC EX106 Owners Manual (Ocr-read)

Page 2


Thank you for your purchasmg this AIWA product. To optimize the performance of this unit, please read

through this manual carefully.




SPECIFICATIONS ...............................................

.......................................................................... 1



0 Tracks from 10 CDs stored in the disc magazine
can be selected and played.

- Horizontal, vertical, slanted or suspended
installation can be made.

' The EASS (Electronic Anti-Shock System)
function reduces skipping or muting of the sound
when the unit is subjected to a shock.

- This unit continues to play with just a short
break when changing discs, usrng playback
sound data transferred to its memory.
Thisfunctionworksonlywhen discs arechanged
in order.

0 CD text information can be displayed in the
display window of the car stereo.

This function may not be available, depending
on the specifications of the car stereo.

- Through the window at the top of the unit, you
can see a disc spinning as it plays.

0 Since it is smaller in size, you will find it easier
to install the unit.



This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation.

This equipmentgenerales, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. it this equipment does cause harmful
interference to radioortelevision reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following

- Fteorient or relocate the receiving antenna.

- Increase the separation between the
equipment and receiver.

-Connect the equipment into an outlet on
circuitdifferent from that to which the receiver
is connected.

- Consult the dealer or an experienced radio/
TV technician for help.

Modifications or adjustments to thisproduct, which
are not expressly approved by the manufacturer,
may vord the users right or authority to operate
this product.

Page 11

Notes on the disc magazine

0 Be sure to place a disc on the disc tray with the
label side up. lfa disc is not set properly, it may
cause damage to the unit.


isc tray

- The disctray may betaken off from the magazine
if you pull the tray forcibly. lithe tray is taken
out, put it back into the magazine as illustrated.
Be sure that both ends of the tray are aligned to
the grooves of the magazine correctly.


W Disc

Disc tray


- Be sure all the trays are set in the magazine
when using the unit.


Compact disc changer

System Compact disc digital audio

Frequency response 5 Hz A 20 kHz

Wow and llutter Below measurable limit

Signal to noise ratio 91 dB or more

Outputs Line output (tor changer
connector only)

Operating temperature
~10 -C to 55 -0

Dimensions 254 X 83 x 173 mm (w/h/d)
(10 x 3 -la x 6 7/5 in.)

Weight 2.1 kg
(4.62 lbs.)

Power requirement 12 V DC car battery
(negatlve ground)

D/A converter 1 bit DAC, 8 times over

Sampling rate 44.1 kHz

Disc size 120 mm

Supplied accessories Disc magazine (1)
Mounting kit (1 set)
Connecting cable (5 m)
(16.4 ft) (1)

Design and specifications are subject to change without